11kw~22kw B Series Submersible Sewage Pump with Auto Coupling System

• Insulation class : F
• Protection class : IP68
• Water temperature : up to 40X
• PH : 6 to 10
• Density of liquid : 1.3g/cm³
• Power supply : three phase 380V ±10%, 50Hz

•                      three phase 380V ±10%, 60Hz

• Motor protection : Not included.suggest overheat protector
• Capacity : up to 860m³/h
• Head : up to 44m
• Maximum immersion depth : 20m
• Cable length : 8m
• Optional: NSK Bearing
•               11kw suggest overheat protector & water leakage probe & star starting way

Three ways of installation
1.movable soft pipe
2.movable hard pipe
3.auto coupling system

B pump incorporates a channel impeller developed exclusively for sewage pumps.The impeller has a wide channel extending from inlet to exit,which prevents internal clogging by solids sucked in the inlet.



Maintance

Coverage:
We undertake to remedy the following faults in products sold by us under the following conditions:
1. The faults are due to defects in design,materials or workmanship.
2.The faults are reported to the manufacturer representative within the warranty period.
3.The product is used only under the conditions described in our product manual.
4.The monitoring equipment incorporated in the product is correctly connected and in use.
5.Genuine the manufacturer parts are used.

Limitations:
The warranty does not cover faults caused by the following:
1.Deficient maintenance
2.Improper installation
3.Modifications or changes to the product and installation carried out without consulting us
4.Incorrectly executed repair work
5.Normal wear and tear
The manufacturer assumes no liability for the following:
1.Bodily injuries
2.Material damages
3.Economic losses