12.7mm 15.88mm Tube Od Heating Cooling Coil Steam Heat Exchanger for Hot Air Stenter M/C

Top quality steam coils built to your exact specifications for new equipment or replacement in commercial and industrial applications.

Steam coils are a common heat source in an air handler to provide heating for many commercial and industrial buildings. The supplied air from the fans is warmed by moving across aluminum, stainless or copper fins. The fins are warm from the exchanged heat of the steam going through the tubes. You may also see steam coils in rooftop units or ductwork.

Most steam coils we see use low pressure steam around 5 to 15 PSI. We sell steam coils for applications that use much higher steam pressure that are typically for process heating in a factory. In this case it's common to see stainless steel tubes used which can withstand the high pressures and temperatures.

Vrcoolertech provides customized type of steam coils according to your specification data or detailed drawing.
Provide Following Parameters to get a quote:
* tube diameter
* material (Is the condenser made of aluminum fin, copper tube, galvanized plate?)
* material and diameter of header
* Fin spacing (FPI)
* Fin thickness 
* Fin type(flat fin or wave fin?)
* tube wall thickness
*Thickness of plate

Material:

Fin Material Options:

-- Aluminum / Most common and cheapest options

-- Copper / Often used in corrosive environments

-- Stainless / Also used in corrosive or food grade environments

-- Connections Materials and Types

-- Copper, Brass, Steel, Stainless

-- Female Thread, Male Thread, Sweat ODS

-- Size range ½" to 4"

Tubes Material Options:

-- Copper / Most common and offers best heat transfer

-- Stainless / Often used for high pressure and high heat applications. Comes 304 or 316 SS

-- Steel / Common for high steam application

-- 3/8, 1/2, and 5/8 are available. Although 5/8 inch tube diameter is the most common selection for chilled water coil because it offers many wall thickness options which can increase the lifespan before tube erosion becomes a problem

Casing Material:

-- Aluminum / Cheapest and most common

-- Copper / Common in corrosive environments

-- Stainless / Common in corrosive or food grade environments

We have customized products for many customers, following are some projects we did before.

We can provide designing data and prodcution drawings.

We promise we use the design software sold by a well-known European HAVC software company. Through 8 years of cooperation with them, we have designed, processed and exported dry coolers to various countries all around the world.
All of customers feedback is that the actual cooling performance is almost the same as the theoretical design value.

The normal package is wooden box. If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.

Lead Time: 20 - 40 days 
Payment Terms: 50% T/T payment in advance, 50% T/T payment before delivery
Packing Condition: Standard export packing or customized packaging

We specialize in designing, manufacturing and exporting refrigeration equipments for the varied industries since 2004.

When it comes to building heat exchanger for any application VRCOOLERTECH Company has the capability to meet your requirements. If you need a heat exchanger using water, steam, refrigerant, glycol, ammonia, CO2 or any other medium, Vrcooler can build it for you. We build heat exchanger for replacement of existing heat exchanger or for new jobs, as well. We make standard copper tube / aluminum fin commercial heat exchanger and we build heavy industrial heat exchanger for process applications. You will be hard-pressed to come up with a job we can't handle.

Our main products:
Tube and Fin Heat Exchanger
Finned Tube Heat Exchanger
Dry cooler
Unit cooler
Air Compressor Cooler
Charge Air Cooler
Generator Cooler

Q1. How to guarantee the quality?
A1. We have one year quality warranty. If the product does not meet the described characteristics and the problem is proven to be our fault, we will provide an exchange for the same specific item.

Q 2: Do you provide OEM or ODM service?
Answer 2: Yes. We can produce standard products under the customer's brand, or modify products to meet customer's individual needs, or co-design and produce completely new products with customers.

Q3: How long can I receive feedback after sending the inquiry?
A3: Typically you will receive feedback within 30 minutes of office hours and 12 hours of non-office hours.

Q 4: How long is the production cycle?
A4: After the order is confirmed, usually the production time is 20-40 days. The specific time depends on the product and the order quantity.

Q5: How do you keep our business in good long-term relationship?
A: We maintain good quality and competitive price to ensure our customers benefit, we respect every customer as our friend, we sincerely do business with them and make friends, no matter where they come from.