Audited Supplier
IS-
High-voltage
Three-column Disconnector
Outdoor High-voltage
Manual
Grounding
Horizontal Rotary Type
Three Pole
Single Ground
Three
Turn the Horizontal
Ist
Manual
IEC IEEE
Oei Power
Conventional Circuit Breaker, Circuit-Breaker Fail
Steel Plate
10000 Times
16-80ka
6.3-31.5ka
OEI Power
Wooden Case
IEC IEEE
China Nanyang
8535309000
Product Description
TECHNICAL SPECIFICATIONS
Single Pole Switch Isolator, 22kV, 800/630A
1.0 General
The single pole switch isolator are used for isolating feeders and lines.
2.0 Service Conditions
a. Ambient Temperature : 5°C - 50°C
b. Relative Humidity : 95% at 45°C (Tropicalised)
c. Environmental condition: Tropical climate with polluted atmosphere
3.0 System Parameters
The switch shall be used on a network having the following characteristics:-
a. Nominal voltage : 22 kV
b. Maximum voltage : 24 kV
c. Earthing Arrangement : Effectively earthed
d. Frequency : 50 Hz
4.0 Standards
The item conform to IEC 60129 or IEC62271-102 Ed.1.0 (2001)-Alternating current disconnectors & earthing switches or any other equivalent international standards.
It will be the responsibility of our to prove equivalency of his standard with one of these 2 standards mentioned above.
5.0 Technical requirements
a. Rated voltage : 24kV
b. Rated continuous current : 630A
c. Impulse Voltage Level (BIL) : 150kV
d. Rated Short time withstand current : 25kA/1 sec
e. Rated peak withstand current : 62kA
f. Creepage Distance : 600mm
6.0 Basic Features
The isolating switch have the following characteristics;
- Single pole type suitable for outdoor use
- Double insulator construction
- Fitted with appropriate latching device to prevent accidental opening due to faults, line vibration, wind or other environmental influences
- Operated by portable insulated hook stick
- Suitable for underslung or vertical mounting
- Fitted with Tin plated palms suitable for Copper and Aluminium compression lugs
- The palms are suitable to accommodate conductor AAAC 150mm2 to BSEN50183: 2000 or armoured cable XLPE insulated 300mm2 Copper or 240mm2 Aluminium to IEC 502
- Incoming and outgoing conductor/cable are connected on fixed parts and not on rocking parts
Information to be furnished with the offer
The following are furnished with the offer:
a) Type Test Reports conforming to the relevant IEC Standards
b) Catalogues, Technical literature and dimensional drawings of the item offered
c) Detailed list of components
d) Duly filled Schedule of guaranteed particulars (Annexure A).
e) ISO 9001:2000 Certificate including the requirements as defined by clause 7 of the ISO 9001:2000 Standard.
f) A list of the supplier's orders for the last five years.
POV2568
Single Pole Switch Isolator, 22kV, 800/630A
1.0 General
The single pole switch isolator are used for isolating feeders and lines.
2.0 Service Conditions
a. Ambient Temperature : 5°C - 50°C
b. Relative Humidity : 95% at 45°C (Tropicalised)
c. Environmental condition: Tropical climate with polluted atmosphere
3.0 System Parameters
The switch shall be used on a network having the following characteristics:-
a. Nominal voltage : 22 kV
b. Maximum voltage : 24 kV
c. Earthing Arrangement : Effectively earthed
d. Frequency : 50 Hz
4.0 Standards
The item conform to IEC 60129 or IEC62271-102 Ed.1.0 (2001)-Alternating current disconnectors & earthing switches or any other equivalent international standards.
It will be the responsibility of our to prove equivalency of his standard with one of these 2 standards mentioned above.
5.0 Technical requirements
a. Rated voltage : 24kV
b. Rated continuous current : 630A
c. Impulse Voltage Level (BIL) : 150kV
d. Rated Short time withstand current : 25kA/1 sec
e. Rated peak withstand current : 62kA
f. Creepage Distance : 600mm
6.0 Basic Features
The isolating switch have the following characteristics;
- Single pole type suitable for outdoor use
- Double insulator construction
- Fitted with appropriate latching device to prevent accidental opening due to faults, line vibration, wind or other environmental influences
- Operated by portable insulated hook stick
- Suitable for underslung or vertical mounting
- Fitted with Tin plated palms suitable for Copper and Aluminium compression lugs
- The palms are suitable to accommodate conductor AAAC 150mm2 to BSEN50183: 2000 or armoured cable XLPE insulated 300mm2 Copper or 240mm2 Aluminium to IEC 502
- Incoming and outgoing conductor/cable are connected on fixed parts and not on rocking parts
Information to be furnished with the offer
The following are furnished with the offer:
a) Type Test Reports conforming to the relevant IEC Standards
b) Catalogues, Technical literature and dimensional drawings of the item offered
c) Detailed list of components
d) Duly filled Schedule of guaranteed particulars (Annexure A).
e) ISO 9001:2000 Certificate including the requirements as defined by clause 7 of the ISO 9001:2000 Standard.
f) A list of the supplier's orders for the last five years.
GUARANTEED PARTICULARS
Single pole switch isolator, 22kV , 800/630A
POV2568
| Serial No. | Description | ||
| 1. | Manufacturer's Reference name/code | OEIpower | |
| 2. | Drawing No. | IS-24 | |
| 3. | Country of Origin | ||
| 4. | Standard specifications to which the switch conform | IEC62271-102 | |
| 5. | Rated Voltage | kV | 24 |
| 6. | Rated frequency | Hz | 50 |
| 7. | Rated continuous current | A | 630 |
| 8. | Rated short time current duration | kA sec | 25kA/1 sec |
| 9. | Impulse voltage withstand 1.2/50µ S | kV | 150 |
| 10. | Total creepage distance | mm | 600 |
