Audited Supplier
Mini ID
ID Card Reader
EM
Wiegand26
Within 10cm
Hospital, Library, Company, Bank, Store
Black
13.56MHz Optional
Wiegand 26
12V
50mA
IP64
Plastic
0.3kg
12 Months
ISO14443A
Dwell
1 PC Access Control Reader
75*116*18mm
Shenzhen China
8471900090
Product Description
125khz mini rfid reader Min-ID
Frequency :125Khz
Card reading type:EM Marine
Reading range:2-6cm
Output interface:Wiegand 26 ,Dallas TM
Input Voltage:8-18V
Current:35mA
Indicator:Red color light
Material: Polyamide
Size(mm):Diameter 25MM,height 22MM
Converter is designed to operate in the absence of:
Atmospheric fallouts, sunshine and humidity condensation.
Operating conditions
Temperature from -30 ° C to +40 ° C;
Relative humidity less than 98% (at 25 ° C).
When there are changes in maintenance conditions, the specification of product may differ
from the nominal values.
Wire diagram
Red: +12VDC
Black :GND
White: data 1
Blue : data 0
Brown : LED
Notice
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND
3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires
Rfid reader photo
Packing list for RFID Reader
1* RFID Reader
Application: access control system
Certification:CE,FCC,ROHS
Frequency :125Khz
Card reading type:EM Marine
Reading range:2-6cm
Output interface:Wiegand 26 ,Dallas TM
Input Voltage:8-18V
Current:35mA
Indicator:Red color light
Material: Polyamide
Size(mm):Diameter 25MM,height 22MM
Converter is designed to operate in the absence of:
Atmospheric fallouts, sunshine and humidity condensation.
Operating conditions
Temperature from -30 ° C to +40 ° C;
Relative humidity less than 98% (at 25 ° C).
When there are changes in maintenance conditions, the specification of product may differ
from the nominal values.
Wire diagram
Red: +12VDC
Black :GND
White: data 1
Blue : data 0
Brown : LED
Notice
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND
3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires
Rfid reader photo
Packing list for RFID Reader
1* RFID Reader
Application: access control system
Certification:CE,FCC,ROHS
