Audited Supplier
BM-125
Brazing
Cup-Shaped
Metal
Soft, Medium, Hard
Hard Floor, Medium Floor, Soft Floor
16/18, 20/25, 35/40, 60/70, 80/100, 120/140
19mm, 22.23mm
Concrete Floor Resurfacing, Epoxy Removal
Hand Held Angle Grinder
Dry
5.5 mm
DIACUTEX
Carton Box
125mm, 180mm
China
82079010
Product Description
Product Introduction
L Segment Diamond Grinding Wheels for grinding concrete and field stones are brazed. Premium Diamond Cup Wheels contain a higher diamond count and feature venting holes for fast, rough, dry or water-cooling grinding with long wheel life. Premium single row diamond cup wheels are ideal for surface preparation, edge blending, smooth shaping, finishing, de-burring and tilt wall finishing of masonry surfaces. Premium Diamond Grinding Cup are used wet or dry with angle grinders and floor grinding machines.
Specification Data
| Product Code | Diameter | Segment Number | Segment Height | Bore |
| CPI 125 | 5" | 7 | 5.5mm | 5/8"-11 / 22.23 |
| CPI 180 | 7" | 8 | 5.5mm | 5/8"-11 / 22.23 |
How to choose the right bond types on cup wheel
THe cup wheels are mainly used to do prep or resurfacing job on concrete floors, however, the hardness of concrete varies. In order to complet the job with high effiency, it is essential to choose the right bond types. Here is the chart of how to define the concrete hardness.
| Mpa | Concrete Hardness | Bond types |
| 60Mpa or More | Very hard | Very Soft |
| 40Mpa-55Mpa | Hard | Soft |
| 28Mpa-40Mpa | Medium Hard | Medium |
| 20Mpa or less | Soft | Hard |
Key Inspection Steps
There are 2 key inspections steps on concrete grinding wheels before delivery: the balance test, and bore hole test. If the cup wheels are not balanced well, it will jump during operation; The bore size will be smaller after painting, if not do the bore size test, it will be difficult to fit the cup wheel to angle grinder.
Packaging
Goods can be transported by air, sea or by Truck, it will be handed over by several parties. Strong packaging is necessary, we are producing good quality products, we hope our goods will be in good condition when you receive them, so we pay close attention to the packaging, here I am showing you how your goods will be packed at our factory.
