12N9-4B-1 12V9ah Conventional Flooded Lead Acid Dry Charged Motorcycle Battery

12N9-4B-1 12V9ah Flooded Dry Charged  Motorcycle Battery 

General Features
--Flooded/Dry charged operation;
--Non-Spillable construction design;
--ABS containers and covers(UL94HB, UL94V-0) optional;
--Safety valve installation for explosion proof;
--High quality and high reliability;
--Exceptional deep discharge recovery performance;
--Low self discharge characteristic;
--Flexibility design for multiple install positions.
 Motorycle Battery Structure&Specification
Component------Raw material; Sealant------------Epoxy resin;
Positive-----------Lead dioxide; Safety valve------EPDR;
Negative----------Lead; Terminal----------Copper;
Container---------ABS; Separator------Fiber glass;
Cover--------------ABS; Electrolyte------Sulfuric acid.

                                     Products Performance
1: Storage Characteristics'
  Voltage >=7.2V after the battery being stored in 40±2ºC environment for 49days, then discharge at high multiple rate for 30seconds.
2: Electrolyte dehydrate characteristics
  Battery dehydrate rate ≤0.9g/ah after fully charged and then continue to be charged at 14.4V in 40±2ºC environment for 1000 consecutive hours.
3:Anti-Vibration characteristics
  Battery voltage ≥12.7V,no leakage of electrolyte ,no breakage of container ,after vibrating vertically at acceleration rate of 68.6m/s,frequence 50-500Hz for 2hours.
4:Self-Discharge rate≤3%/month
5:Internal Resistance≤12m Ovum
6:Products excellence performance
 Can be stored for a long time period and no need to recharge during storage, battery left over capacity can be as high as 70% after being storage for 1 year and can be restored to 85% of its full capacity when fully recharged.

Over discharge performance under low voltage : this battery can be restored to 80% of its full capacity while others only being rendered to failed because of the Stalinization of the sulphur acid and its. Consequent maintenance ,after subject to long period of replaced over discharge ding due to frequent engine igniting, lighting and insufficient charge for the battery caused by short distance driving and low speed.

Over charge performance under high voltage : being charged by a 16V vehicle borne generator, this battery can be as high as 90% of its full capacity, do drying up in the electrolyte due to little gas releasing and the released gas being absorbed by the plates, while ordinary sealed lead acid battery usually being charged by a 14.8V and dry charged battery by a 16V vehicle borne generator ,will be soon rendered unless caused by drying up of the electrolyte if sealed lead acid battery being charging by a 16V vehicle borne generator.

Quick charge acceptance :this battery can quick absorb the momentary charging energy generated by motorcycle generator and braking testing date shows that it can absorb 70% of the energy released while others only 40% after being charged under this kind of condition for 1 hour.
High multiple rate stating performance :small internal resistance and self discharged ,normal temperature starting discharge multiple rate can be as high as 11c, so this battery can be used to substitute high wattage battery.

Super long life span: this battery life span is twice as long as ordinary battery's due to its slow capacity attenuate rate under repeated deep discharge cycles.

Battery Production & Certificate Copy

Factory Tour/Quality Test 

We have very advanced technology, special craft and precision testing equipments continuously supply our customer best quality battery and best service feeling.


Packaging & Delivery

Packaging Details:   
1.All the battery with crown carton box or colorful carton box packing ,all box with wooden pallets packing.
2.The pallet size is 1.0mx1.2m fumigation certified hard wooden pallet and wraped with shrink plastic,we can load 10 or 20 pallets depending on battery weights.
3.We can also use bulk package for battery specially needed but with shrink plastic pack outside.
4:Delivery within about 15-30days as per the order quantity and specification requirement.
 

FLOODED/DRY CHARGED MOTORCYCLE BATTERY MODELS/ADVANSTAGE
We have our own professional Motorcycle battery factory, so we can produce plates by ourselves, so that we can have a good control on the cost and the prodcution time and also we have full rage battery supply ability for sealed MF/Flooded/Dry Charged MF.


QUESTION YOU CONSERNED & ANSWER OF US

Q :  Your main market is?

A :   Africa, Middle east, Middle South America, South-east Asia ETC....

 

Q :  Delivery is fast?

A  : 15-30 work days for car battery, motorcycle battery and VRLA battery depending quantity and specification.

 

Q :  Warrantee term and policy?

A:   WARRANTY WILL START FROM THE DATE IT WILL ARIVE AT OUR PORT, AND IF ANY CLAIM OCCURS WITHIN THE WARRANTY PERIOD, WE WILL SEND YOU THE PICTURE OF THE BATTERY AND LOT NO, AND WE WILL ADJUST THAT AMOUNT FROM THE NEXT ORDER PAYMENT.

 

Q :  What is your main advanstage? 

A : 1. Super CCA Performance   

    2. Low self-discharge 

    3. Extended Battery Life 

    4. High Temperature Ressistant 

    5. Factory price
 

Q: What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery. Or Irrevocable LC sight from famous bank.
 

Q: How do you make our business long-term and good relationship?

  A:1. Always good quality and competitive price to keep final customers's benefit ;

     2. Treat customer as  friend , sincerely do business and