Audited Supplier
HDGC-3985-CH013004
1 Year
1 Year
Storage Battery Tester
Charge and Discharge
Lead-acid Battery
Customized
10-300V
0-120A
DC10-300V
0-40A
220V or 380V
<75dB
HD Power
Wooden Box with Foam Inside
Made in China
9030899090
Product Description
HDGC3985 Battery Discharge Charge Tester
Technical Parameter
Battery Discharge Charge Tester is mainly used for the charge test of the lead-acid battery of the backup power supply in the telecommunications, mobile, substation, railway transportation and pertrochemical industry power DC industries. It can proceed the discharge and charge for the batteries to extend the lift-time .
- PTC ceramic resistor is adopted to avoid the red heat phenomenon for a safer discharge process .
- Intelligent SCM ARM control, 7inch 1024*600 LCD screen , capacitive touch operation, built in English menu, simple and clear operation menu.
- Automatic self-protection stop function, over-heat protection, over voltage protection, over current protection and reverse connection protection ,alarm prompt is displayed on the screen once it appears any issue, air circuit breaker automatically cut off .
- It can set discharge termination condition including cell low voltage,whole group voltage low/high, charge current low, charge/discharge time, charge/discharge capacity. When any condition can be met, the instrument can stop automatically testing with buzz sound and record the stop reason at the same time.
- It can evaluate the capacity of discharge test time .
Technical Parameter
| Model No. | HDGC-3985 |
| Discharge Voltage Range | 10-300V |
| Discharge Current Range | 10~19V:0~80A 19~180V:0~120A 180~300V:0~80A |
| Charge Voltage Range | DC10-300V |
| Charge Current Range | 0-40A |
| Working mode | Standalone mode, parallel master mode, parallel slave mode, and remote controlled mode |
| Protection performance | Over-voltage protection, under-voltage stop, over-current protection, reverse wiring protection, 65ºC over-temperature protection,LCD prompt and buzzer alarm |
| Cell voltage collection (optional) | Multi-band RF wireless module for communication distance of more than 100m, compatible with 2V/4V/6V/12V cell voltage monitoring, 1-25 groups of RF wireless monitoring modules for monitoring up to 300 batteries, and single wireless monitoring module for monitoring 12 cells |
| Control precision | Discharge current≤±1%; group voltage≤±0.1%; cell voltage≤±0.05% |
| PC communication | RS485 interface, USB interface |
| Work Environment | |
| Heat radiation | Forced air cooling |
| Temperature | Working rage: -5-50ºC Storage temperature: -40-70ºC |
| Humidity | Relative humidity 0-90% (40±2ºC) |
| Elevation | Rated elevation of 4,000m |
| Noise | <75dB |
| Working Power Supply | |
| Voltage | Power supply: single-phase AC220V (-20%-+30%), frequency: 45-65Hz; charging power supply: refer to nameplate parameters or case label |
| Electric strength test | Input-shell: 2200Vdc 1min Input-output: 2200Vdc 1min Output-shell: 700Vdc 1min |
| Safety | Compliance with EN610950 |
