Audited Supplier
The insulation self-regulating heated cable is widely used for pipe/tank freeze protection, such as water pipe, solar water heater pipe, oil pipe, downspout. For roof snow melting .Soil warming for plants .Floor heating and other heating applications.
For roof snow melting
Soil warming for plants
Floor heating and other heating applications.
Structure:
2. Conductive heating element
3. Insulation of heating element
4. Double HDPE outer jacket
Avantages:
1. Equal temperature safe and reliable.
2. Save electric energy.
3. Rapidly Temperature increase
4. Low cost of installation and operation
5. Easy to install and maintain.
6. Convenient for automatic management.
7. No pollute environment.
Model Number | DXW-J730 |
Jacket | PE |
Voltage | 12V, 24V DC, 110V, 220V AC |
Color | Black |
| Width * Thickness | 12V, 24V, 110V (8mm * 3mm); 220V (10mm * 3mm) |
Power | 15W/m, 20W/m, 25W/m (at 10C degrees) |
Max working temperature | 65 centigrade |
| Max enduring temperature | 135 centigrade |
| Min bend radius | 15mm |
| Conductor | tinned copper wire |
| Max circuit length | 220V,50m; 110V,30m; 24V,20m, 12V,5m |
Installation steps:
1) Seal the end of the cable with heat shrinkable tube or other electrical insulating tape. DO NOT connect the two conductors together!
2) Connect the other end with cold wire or plug (for connecting to the power supply).
3) Wrap the heating cable on water pipes or fastening straight on pipes, both are ok. Put the whole cable on the pipes and fasten it every 30~60cm with thermal tape or aluminum tape(sold in my store).
4) Suggest to wrap a layer of rubber insulation on the pipe, enhance efficiency of the heating cable and save energy, also can protect the heating cables.
5) Connect or plug into 12V, 24V, 100~120V, 220~240V (according to your cable). The heat trace system is finished.
Tips:
Max circuit length ~ 50 meters (220V);
Max circuit length ~ 30 meters (110V);
Max circuit length ~ 20 meters (24V);
Max circuit length ~ 5 meters (12V).
