Audited Supplier
JR32-32-10
Volumetric Filling Machine
Automatic
Liquid
Multi-Head
Single-Room Feeding
Rotor
Atmospheric Pressure
Chute Pneumatic Combination Lifting
Rotary
Bottle
Plastic
Washing, Filling, Capping Machine
Stainless Steel 304
40MPa
Full Automatic
JR
Plastic Polyfoam
JR32-32-10
china, zhangjiagang
8422301090
Product Description
Production Introduction of Complete Drinking Water Filling Production Line
This JR Washing-filling-capping 3-in-1unit: Beverage Machinery is used to produce polyester bottled mineral water, purified water, alcoholic beverage machinery and other non-gas beverage machinery. Beverage Machinery can finish all the process such as washing bottle, filling and sealing, it can reduce the materials and Outsiders touch time, improve the sanitary conditions, production capacity and economic efficiency.
The Complete Bottled Mineral Water / Pure Water Production Line used in the beverage filling operations. The three functions of bottle wash, fill and seal are composed in one body of the machine. The whole process is automatic.
Washing heads
The rotary disk is fully made of SUS304 stainless steel. Using imported special efficient spray nozzle, the washing water will be sprayed in a particular angle, can wash any part of the inner wall, rinse with water thoroughly and save flush bottle.Bottle clamp and lifting mechanism of sliding sleeve adopts Germany Igus corrosion resistant bearing without maintenance.Washing part moves by a frame in the transmission system through the gear transmission.
Filling heads
The washing bottle, filling, sealing are connecting with the thumbwheel card bottleneck transportation methods.The rotating disk is all made of SUS304 stainless.Filling method is fravity filling.Filling valve manufactured by SUS316.The filling valve structure design is reasonable, the filling quantity is accurate.
Capping heads
The capping machine is the highest precision in 3-in-1 unit machine, on the reliability of equipment operation, has enormous influence on the defective rate of the product.Introduced the world's most advanced Italian AROL capping machine technology, combining with the filling machine production experience improvement.
Main Features
1. Using the wind sent access and move wheel in the bottle directly connected technology; canceled screw and conveyor chains, this enable the change the bottle-shaped become easier.
2. Bottles transmission adopt clip bottleneck technology, bottle-shaped transform not need to adjust the equipment level, only change related the curved plate, wheel and nylon parts is enough..
3. The specially designed stainless steel bottle washing machine clip is solid and durable, no touch with the screw location of bottle mouth to avoid secondary pollution.
4. High-speed large gravity flow valve filling valve, filling fast, filling accurate and no liquid lose.
5. Spiraling decline when output bottle, transform bottle shape no need to adjust the height of conveyor chains.
6. Host adopt advanced PLC automatic control technology, the key electrical components from famous company such as Japan's Mitsubishi, France Schneider, OMRON.
More models
Flow chart:
Water treatment system -RO system (Hollow fiber filter)
Raw water→Raw water tank→Water pump→Silica sand filter→Active carbon filter→Sodium ion exchanger → Precision filter→ Reverse Osmosis (hollow fiber filter)→Ozone generator→Water tank → Pump
Filling and Packing
Cap conveyor machine
Bottle uploader→Air conveyor→ Filling Monoblock(3-In-1 machine) → Conveyor →Light checker→Blow dryer→ Labeling machine→Code sprayer→PE film packing machine (or carton packing machine)→Stock
PET bottle making:
PET granules→ Injection molding machine→ PET prefomrs→ PET bottle blow molding machine→ PET bottles
This JR Washing-filling-capping 3-in-1unit: Beverage Machinery is used to produce polyester bottled mineral water, purified water, alcoholic beverage machinery and other non-gas beverage machinery. Beverage Machinery can finish all the process such as washing bottle, filling and sealing, it can reduce the materials and Outsiders touch time, improve the sanitary conditions, production capacity and economic efficiency.
The Complete Bottled Mineral Water / Pure Water Production Line used in the beverage filling operations. The three functions of bottle wash, fill and seal are composed in one body of the machine. The whole process is automatic.
Washing heads
The rotary disk is fully made of SUS304 stainless steel. Using imported special efficient spray nozzle, the washing water will be sprayed in a particular angle, can wash any part of the inner wall, rinse with water thoroughly and save flush bottle.Bottle clamp and lifting mechanism of sliding sleeve adopts Germany Igus corrosion resistant bearing without maintenance.Washing part moves by a frame in the transmission system through the gear transmission.
Filling heads
The washing bottle, filling, sealing are connecting with the thumbwheel card bottleneck transportation methods.The rotating disk is all made of SUS304 stainless.Filling method is fravity filling.Filling valve manufactured by SUS316.The filling valve structure design is reasonable, the filling quantity is accurate.
Capping heads
The capping machine is the highest precision in 3-in-1 unit machine, on the reliability of equipment operation, has enormous influence on the defective rate of the product.Introduced the world's most advanced Italian AROL capping machine technology, combining with the filling machine production experience improvement.
Main Features
1. Using the wind sent access and move wheel in the bottle directly connected technology; canceled screw and conveyor chains, this enable the change the bottle-shaped become easier.
2. Bottles transmission adopt clip bottleneck technology, bottle-shaped transform not need to adjust the equipment level, only change related the curved plate, wheel and nylon parts is enough..
3. The specially designed stainless steel bottle washing machine clip is solid and durable, no touch with the screw location of bottle mouth to avoid secondary pollution.
4. High-speed large gravity flow valve filling valve, filling fast, filling accurate and no liquid lose.
5. Spiraling decline when output bottle, transform bottle shape no need to adjust the height of conveyor chains.
6. Host adopt advanced PLC automatic control technology, the key electrical components from famous company such as Japan's Mitsubishi, France Schneider, OMRON.
More models
| Washing, filling, capping heads | JR14-12-4 | JR18-18-6 | JR24-24-8 | JR32-32-10 |
| Capacity based on 500ml | 3000BPH | 8000BPH | 12000 BPH | 15000 BPH |
| Applicable bottle | H=170-320, Φ=50-100, (330∼2000ml) | |||
| Pressure | 0.25-0.3 MPA | |||
| General power | 3 KW | 3 KW | 4 KW | 5.5 KW |
| Overall dimension | 2400×1900×2800 | 2800×2050×2200 | 3100×2250×2800 | 3600×2900×2900 |
| Weight | 4000 KG | 5000 KG | 6500 KG | 8000 KG |
Flow chart:
Water treatment system -RO system (Hollow fiber filter)
Raw water→Raw water tank→Water pump→Silica sand filter→Active carbon filter→Sodium ion exchanger → Precision filter→ Reverse Osmosis (hollow fiber filter)→Ozone generator→Water tank → Pump
Filling and Packing
Cap conveyor machine
Bottle uploader→Air conveyor→ Filling Monoblock(3-In-1 machine) → Conveyor →Light checker→Blow dryer→ Labeling machine→Code sprayer→PE film packing machine (or carton packing machine)→Stock
PET bottle making:
PET granules→ Injection molding machine→ PET prefomrs→ PET bottle blow molding machine→ PET bottles
