Audited Supplier
HW-UAVRF-3
Uav Detection and Control System
8
Band1-5 (25W), Band6:100W, Band7: 25W, Band8: 100W
360° in All Directions
More Than 1500 Meters
AC100-240V
Continuous Operation of AC Power Supply
28.96 Kg
0.36kg*8
8.1 Kg
45*52.5*29.5 Cm
φ3.6*60cm
IP66
GPS
2.4GHz/5.8GHz Is Standard
No
Carton Package
60*25*15cm
China
9030409000
Product Description
UAV Detection and Control system
Description
It can be used in all kinds of emergency scene, security scene, important activity scene, airspace of confidential units and various places to prevent UAV from falling and wounding. By setting up in an appropriate position, a UAV protection area can be formed in the designated area, and the UAV cannot enter the area. It can set up 24 hours unattended no-fly zone.
Performance Characteristics
1. 24-hour automatic real-time monitoring and defense
2. Blacklist and whitelist
3. No interference, no impact on the surrounding environment such as WIFI, Bluetooth, aircraft
4. Synchronous all-round defense of multiple drones
5. Early warning
6. Dynamic networking Supports multiple networking through the cloud server, which is flexible and covers the whole area
7. Defense mode: automatic defense, linkage with detection function, one key to open automatic defense, realize unattended
8. System configuration: support flexible system configuration, adapt to a variety of environment and site requirements
Technical Specification| Strike equipment parameters | |
| Number of frequency bands | 8 |
| Frequency coverage | BAND1:410-470MHz;BAND2:840-930MHz;BAND3:1200-1300MHz;BAND4:1420-1460MHz;BAND5: 1555-1650MHz;BAND6: 2400-2500MHz;BAND7: 5150-5350MHz;BAND8: 5725-5850MHz |
| Transmission power | BAND1-5:25W;BAND6:100W;BAND7: 25W;BAND8: 100W |
| Beam width | 360° in all directions |
| Radius | >=1500 meters |
| Supply voltage | AC100-240V |
| Working hours | continuous operation of AC power supply |
| Host weight | 28.96kg |
| Antenna weight | 0.36kg*8 |
| Bracket weight | 8.1kg |
| Host size | 45*52.5*29.5cm |
| Antenna size | φ3.6*60cm |
| Bracket size | Base:46.5 x 65cm,height:142.5cm |
| Interference mode | Expel/force landing |
| Protection level | IP65 |
| Operating environment | host:-20ºC - +55ºC |
| Detection equipment parameters | |
| Supply voltage | AC100~240V |
| Dimension Diameter | 318mm* height 359mm |
| Weight | 9.5 kg |
| Detection power consumption | 50W |
| Normal operating temperature | -25ºC~55ºC |
| Protection level | IP66 |
| Network support | Tri-netcom |
| Positioning | GPS |
| Detection mode | radio passive automatic detection |
| Detection range | 360 degrees full coverage |
| Detection frequency | 2.4GHz/5.8GHz is standard |
| Detection range | 5KM for stable detection |
| Early warning | The remote will detect it when it's turned on |
| Blacklist and whitelist | Identify blacklist and whitelist drones |
| ID identification | Identify the electronic fingerprint of UAV |
| Support identification protocol | LightBridge1; LightBridge2; Ocusync; Ocusync2.0; WIFI and WIFI variant protocol; Zigbee; Bluetooth |
| Background operating system parameters | |
| Name | Lenove |
| Model | Legion R7000 2020 |
| Processor | AMD R5-4600H |
| Graphics card | RTX 1650 |
| Memory capacity | 16GB |
| Solid state drive | 1TB |
| Memory | 4GB |
| Screen type | FHD IPS display |
| Screen size | 15.6 inches |
| Screen ratio | 16:09 |
| Screen resolution | 1920 x 1080 pixels |
| Screen refresh rate | 165Hz |
| Operating system | Windows10 64 |
