150mm 4 Core Steel Wire Armoured SWA Cable Application

150mm 4 Core Steel Wire Armoured SWA Cable made up of a black PVC sheath, XLPE insulation, copper conductors, and steel wire armoring. This type of cable is designed for mains electricity in various applications, including laying underground, power networks, and incoming mains to homes amongst a host of other uses externally and internally.

150mm 4 Core Steel Wire Armoured SWA Cable is suitable and often used for direct burial, with the steel wire armoring providing further protection from external damage. The XLPE insulation is resistant to several different fluids, and chemicals and has good heat stability, as well as being UV Resistant.

150mm 4 Core Steel Wire Armoured SWA Cable Standard
BS 5467, IEC/EN 60502-1, IEC/EN 60228, Flame Retardant according to IEC/EN 60332-1-2

150mm 4 Core Steel Wire Armoured SWA Cable Construction

Conductors: Plain circular, compacted, or shaped stranded copper or aluminum conductor (Conductor shaped: RE=circular solid, CC=compacted circular stranded, SM=sector shaped stranded)

Insulation: XLPE (cross-linked polyethylene) rated at 90°C

Color identification 

1 Core: Red or Black,  2 Cores: Red, Black,  3 Cores: Red, Yellow, Blue, 4 Cores: Red, Yellow, Blue, Black,  5 Cores: Red, Yellow, Blue, Black, Green

Above 5 Cores: Black Cores with White numerals 

*The above identification can be changed as a user requirement

Assembly /Inner Sheath: Two, Three, or Four insulated conductors are laid up together with non-hygroscopic fillers and the assembly is bedded with an extruded layer of PVC. In the case of non-armored cables, this layer may be omitted

Armour: Galvanized Steel Wires, single core cables shall be Aluminium wire armor, and Aluminum/Steel Tapes applied helically over the bedding of multi-core cables as per IEC 60502.

Sheath: Extruded PVC Type ST2 as per IEC 60502-1 or Type 9 as BS 6346/5467.

Special type of PVC sheathing materials such as Fire Retardant PVC, Anti-Termite PVC, Anti-Rodent PVC, Sunlight resistant PVC, and Oil Resistant PVC are available on special request. Also, special sheathing materials such as LLDPE, MDPE, HDPE, LSZH, and CPE are available on request.

Fire Performance of Cable Sheaths

Cables can be supplied with special flame retardant PVC outer sheath to comply With the flame test requirements of IEC 60332-3-22, IEC 60332-3-23, and IEC 60332-3-24, we can also supply cables with Low Smoke Halogen Free (LSHF) material according to IEC 60502-1, BS 7211, BS 6724 or other equivalent standards.

150mm 4 Core Steel Wire Armoured SWA Cable Technical Data