Audited Supplier
DTH drilling tool is a kind of drilling system which uses compressed air as motivation, makes drilling impact motivation parts down the hole, to control the piston reciprocating motion by the distribution device in the hammer, and then impacts the DTH bit in the front of the hammer to transit the impacting power to the bit. The DTH bit in the front of the hammer breaks the rock to drill hole.
Our variety of Down the Hole drill bits is manufactured using high quality materials to provide you with a fine balance between penetration capability and bit life. We offer a comprehensive range of standard and made to order drill bits on an extensive selection of shanks with a wide variety of head designs to suit every project.
1.Strict quality controlling
2.Selected high quality special steels and carbide
3.Produced by CNC machines
4.Simple and reasonable design, Low problem rate
5.Low air consumption, smooth drilling, Maximum impact power, High penetration rate
| Bit diameter | Flushing holes No.*Button Dia. mm | No.*Button Dia. mm |
Weight (kg) | ||
| mm | inch | Gauge Buttons | Front Buttons | ||
152 | 6" | 2*Ф26 | 8*Ф18 | 4*Ф16+4*Ф14 | 23 |
156 | 6 1/8'' | 2*Ф26 | 8*Ф18 | 4*Ф16+4*Ф14 | 23.5 |
160 | 6 5/16" | 2*Ф26 | 8*Ф18 | 4*Ф16+4*Ф14 | 23.5 |
165 | 6 1/2" | 2*Ф26 | 8*Ф18 | 8*Ф16 | 24 |
171 | 6 3/4" | 2*Ф26 | 8*Ф18 | 10*Ф16 | 25 |
185 | 7 1/4" | 3*Ф22 | 9*Ф18 | 10*Ф16 | 27 |
190 | 7 1/2'' | 2*Ф26 | 10*Ф18 | 13*Ф16 | 28 |
203 | 8'' | 2*Ф26 | 10*Ф18 | 14*Ф16 | 31 |
1. Drop Center Bit
For high penetration rates in soft to medium hard and fissured rock formations. Low to medium air pressures. Maximum hole deviation control.
2. Concave Face
The all-round application bit face specifically for medium hard and homogenerous rock formations. Good hole deviation control and good flushing capacity.
3. Flat Face Bit
This kind of face shape is suitable for hard to very hard and abrasive rock formations in applications with high air pressures. Good penetration rates an resistance to steel wash.
4. Double Gauge Face
This kind of face shape is suitable for fast penetration rates in medium to hard rock formations. Designed for high air pressures and good resistance to steel wash step gauge bit.
5. Convex Face
For high penetration rates in soft to medium-hard with low to medium air pressures. It is the most resistance to steel wash, and may reduce the load and wear on the gauge buttons, but poor hole deviation control.
We are able to manufacture, export and supply our clients excellent quality DTH Hammers like DTH Hammer Bits and RC Hammer. These hammers are meticulously manufactured with utmost perfection by utilizing superior quality raw materials and efficient machinery. Sturdy in construction, the provided hammers are specifically designed to suit high pressure drilling rigs. Also, the offered DTH Hammers can be purchased from us in distinct technical specifications at industry leading rates.
Our variety of Down the Hole drill bits is manufactured using high quality materials to provide you with a fine balance between penetration capability and bit life. We offer a comprehensive range of standard and made to order drill bits on an extensive selection of shanks with a wide variety of head designs to suit every project.
Sollroc DTH bits are interchangeable with these famous bits with CIR, Mission, DHD, SD, QL etc. series shank.
Delivery Time
Generally need 15-25 days
Transport Way
By air, By Sea or By Express
