Audited Supplier
SK20
Customized
RoHS, CE
Saiko
LCD
10 Workdays
Length of Cable 3m
64PCS in One Carton
Saiko
1PCS to a Small Box, 64PCS/ Carton, Size of Carton
86mm*80mm*50mm
Jiangsu
Product Description
Introduction
The RTC70 XX is used for 2-position control with on/off output for the control the temperature by means of an NTC sensor Placed externally or internally in the thermostat.
Application
For the control of warm-water(floor) heating systems and direct electric heating systems used in Commercial buildings,Residential buildings, Light industrial buildings.
Technical data
Dimension
Circuit diagram
Display symbols
The RTC70 XX is used for 2-position control with on/off output for the control the temperature by means of an NTC sensor Placed externally or internally in the thermostat.
Application
For the control of warm-water(floor) heating systems and direct electric heating systems used in Commercial buildings,Residential buildings, Light industrial buildings.
Technical data
| Voltage | 230VAC |
| Current load | 16A |
| Housing material | Self-extinguishing PC |
| Type | Floor heating parts |
| Protection grade | IP20 |
| Power consumption | 5W |
Circuit diagram
Display symbols
Mounting of Outer Sensor
Please place the casing under the floor with the outer sensor in, the terminal of which should be thickened and placed on the top of the concrete layer. Sensor cable can be extended to 50m with other cables if necessary. If multi-core cable is used as extended cable, extra cable core should not be used for power supply (e.g. power supply for heating cable) for avoiding the interference of voltage signal to the heating thermostat. If there is shielded cable in the extended cable, shielded cable should not be connected to ground but to terminal 7. It is recommended that the extended cable and casing should not be shared with others.
