Audited Supplier
16 inch electric stand fan
*220V/50Hz,4-PP blade
*3 speed setting, cross base
*Good price&good quantity
*White color shows your elegant taste
| Product size | 43 x 40 x 130cm (16") | Voltage | 100V-240V |
| Motor | 66*14 mm | Frequency | 50Hz / 60HZ |
| Grille | 1.3mm x 120 spoke guard | Power | 40W |
| Base | 2kg round base | Color | white & blue |
| Packing | 5 layer wihte box | Placement | stand |
| Blade | 3 AS blades | Application | indoor |
| Power cord | 2*0.75mm²*1.8m | Product weight | 6 kg |
| Light | none | Packing G.W | 7 Kg |
| Material | iron,aluminum,PP,ABS | Packing N.W | 6 Kg |
| Speed rpm | >1300RPM | Packing size | 44 x 15.5 x 53 cm |
| Noise level | 40-50 dB | Packing unit | 1 pc/ box |
| Fan flow rate | 38 m³/min | QTY /40 HQ | 1800 pcs |
| Air velocity | 5 m/s | Port | zhongshan, shenzhen |
| Speed level | 3 | Payment terms | T/T |
| Rotation | 135° horizontal oscillation | Delivery time | 15-20 days |
| Tilt angel | 45° | MOQ | 500 pcs |
Pass No. 18 Children's finger test (Diameter: 8.6mm) bsed on impact test.
Model | Size | Power | Remote Controler | 20GP | 40HQ |
FS-40B | 16" | 45W | Option | 1250 | 3200 |
| FS-45B | 18" | 50W | Option | 980 | 2100 |
Payment & Shipment
| Payment Term | TT 30% Deposit, TT 70% Before Shipment or against B/L copy, L/C at sight |
| Shipment term | FOB Zhongshan / Shenzhen ; CIF |
| Delivery time | 30 days, below 5*40HQ ; 30-40 days, above 5*40HQ |
| Warranty | 1% spare parts for free ; 1 years warranty |
| Certification | CE / EMC / ERP / ROHS / CB / SAA |
Related mist fan
ASSEMBLY INSTRUCTIONS
BASE AND PILLAR ASSMBLY
1.Take our base and pillar part from the carton.
2.Revolve the height adjustor anti-clock wisely out,draw the steel tube out of the pillar.Then revolve the height adjustor clock-wisely to fasten it.
3.Locate the pillar proper into the base,take the screw nut from the plastic bag and fit if to the pillar from the bottom of the base and fasten it.
4.Adjust the height adjustor to meet you requirement of the height of the wind sending.
FAN BODY AND COLUMN ASSEMBLE
Unscrew the fixing knob on the back of the bottom of fan body,emptied the hole in the bottom of fan body,put extension column into the hole of the fan body,then tighten the fixing knob.
BLADE AND GRILLES ASSEMBLY
1.Remove the spinner and the plastic nut from the front side of the motor shaft then tighten the plastic nut.
2.Discard PVC sleeve on shaft.Insert the blade into shaft,made sure the stopper pin is clipped in to the groove of the blade.Screw the spinner counter clockwise to tighten the blades.
3.Hold the front guard to make sure that the trade mark is level and that the front guard are centered over the rear guard.Then push all the safety clips firmly into place.
OPERATION INSTRUCTION
Speed control please use "speed "switch to turn on/off the fan and adjust the speed by push the swich to number indicating. 0-off 1-low 2-medium 3-high
OSCILIATION CONTROL
To make the fan oscillating,pres the oscillation knob located on the top of the motor housing.To get the directional airflow,press the oscillating knob
.
TILTING CONTROL
Unscrew the tilting knob,adjust the fan head to the desirable angle by holding the fan head,then tighten the knob.
MAINTENANCE INSTRUCTIONS
The fan requires little maintenance.Do not try to fix it by yourself,refer it to qualified service personnel if service is required.
1.Before cleaning and assembling,do not plug the pins into the socket.
2.To ensure adequate air circulation to the motor,keep vents at the rear of the motor housing room dust,fluff and etc,A vacuum cleaner can not be used to clean these vents before unplug.Do not disassemble the fan to remove fluff.
3.Please wipe the exterior ports with a soft cloth soaking a mild detergent.Do not use any abrasive detergent or solvents to avoid scratching the surface.
4.Do not allow water or any other liquid in to the motor housing or interior parts.
5.If the power cord is damaged,it is strongly recommended to request a specialist to handle.
Our factory is located in Sanjiao town, Zhongshan city withconvenient transportation. We introduced advanced equipment, checkout equipment and excellent manufacturing technique. Airmaker pays more attention to R&D ability. Since establishment, we insist on "Customers first and continuous improvement". We also have shaped unique philosophy and culture in our development process, especially, we have received good reputation from many customers due to our philosophy of 'health & nutrition".
Airmaker has a professional R&D team and introduces the international advanced develop and design instruments. It commits to be healthy and nutrient home appliance expert by insisting to design creative appearance and technical-oriented products. It pays attention to scientific management and quality of product by following ISO9001 and 5S management to achieve standardized and large-scale production.
Based on the honesty operation, our products export to Europe, USA,South Africaand others inSouth-east Asiaand so on.. We have the energetic sales team and dedicated in the sales of various fans in order to make the customers enjoy life.
Airmaker has been sticking itself to the principle of being a one-hundredEnterpriseby team hard work and pursuing zero-defect products . We will provide the customer with the best quality, competitive price, professional technology and share with our customer "win-win".
