Audited Supplier
18 Months
12 Months
Pipe Extruder
PP
Pipe Extrusion
One Feed
Integral Type Extruder
Single-Screw
Full Intermeshing
Deep Screw
Don't Exhaust
Automatic
Computerized
From 16mm-250mm
Water, Engergy, Gas, Irrigation, etc.
Long Life/High Efficiency/High Capacity
by Siemens PLC Screen Touch
Siemens, ABB, Omron, FUJI, etc.
Around 5-35meter/Minute
Around 40 Days
Siemens
LCL and FCL
Available
Siemens/ABB Brand
Pipe Machinery
CE, ISO9001:2008, SGS
Customized
PPR
YILI
Plastic Film and Wooden Pallet
29m
China
84778000
Product Description
Introduction
PPR PP pipe production line of YILI Machinery can achieve full automatic control from material feeding till pipe collection, with high speed and excellent performance. It can be used to make PPR pipes, PERT pipes, PP pipes, which are mainly used in indoor floor heating system and indoor hot water supply system. The whole production line is controlled by PLC integrated control system, easy operation with automatic fault alarm system. The pipes ranges from 16mm to 250mm with thickness up to 30mm.
Technical Specification
Tech Features & Advantages
Technology Process
PPR PP pipe production line of YILI Machinery can achieve full automatic control from material feeding till pipe collection, with high speed and excellent performance. It can be used to make PPR pipes, PERT pipes, PP pipes, which are mainly used in indoor floor heating system and indoor hot water supply system. The whole production line is controlled by PLC integrated control system, easy operation with automatic fault alarm system. The pipes ranges from 16mm to 250mm with thickness up to 30mm.
Technical Specification
| 33D Series Classical Production Line: | ||||
| Model | OD (mm) | Extruder | Max. Output (kg/hr) | Max.Haul-off speed (m/min) |
| PPR63 | Φ20-63 | SJ65/33 | 150 | 10 |
| PPR110 | Φ20-110 | SJ65/33 | 180 | 12 |
| PPR160 | Φ50-160 | SJ75/33 | 300 | 8 |
| PPR250 | Φ63-250 | SJ75/33 | 330 | 6 |
| 38D Series High Efficient Production Line: | ||||
| Model | OD (mm) | Extruder | Max. Output (kg/hr) | Max.Haul-off speed (m/min) |
| HPPR63 Single | Φ20-63 | HSJ60/38 | 280 | 20 |
| HPPR63 Dual | Φ20-63 | HSJ60/38 | 360 | 18*2 |
| HPPR110 Single | Φ20-110 | HSJ60/38 | 280 | 20 |
| HPPR110 Dual | Φ20-110 | HSJ75/38 | 450 | 18*2 |
| HPEG160 | Φ50-160 | HSJ60/38 | 360 | 12 |
| HPEG250 | Φ75-250 | HSJ75/38 | 450 | 10 |
Tech Features & Advantages
- High performance extruder with special screw structure, good plasticization and low energy consumption;
- Extrusion head with spiral structure, make sure the melt inside distributed evenly to achieve best plasticization;
- Calibrator design with water ring which is easy to clean, and to achieve best cooling and fastest forming;
- Advanced pipe line layout design and adjustable spray angle for better cooling effect;
- Various kinds of haul-off unit meets requirements for different pipe size and different speed requirement;
- No-dust cutter serves with Servo drive, which ensure accurate cutting of pipes.
Technology Process
-Extruder and Die set-
-Calibrator specially designed for PPR pipes-
- Vacuum & Cooling tank-
-Haul-off & Cutter-
