Audited Supplier
Enbar specializes in the production of high-rate lithium battery manufacturers, the main advantages of its products for high-density solid-state battery lighter weight, smaller volume. The battery energy density can exceed 400Wh/kg
The battery volume energy density can exceed 1200Wh/L
The solid state battery is compatible with the existing process, simplifying the production process and facilitating mass production
Reduce the use of negative electrode materials, and reduce the cost of traditional lithium-ion batteries by about 20%
The products are suitable for: airplane model, car model, boat model, toy gun water bomb gun battery, remote launch battery, car emergency start power battery, agricultural plant protection drone battery and other power equipment that needs batteries.
| Brand | Enbar |
| Model | 7.9*75*174mm |
| Capacity | 16.7~17Ah |
| Voltage | 2.6~4.2V |
| Max.Charge Current | 1Cmin |
| MaX.Momentary Discharge Current | 7Cmin |
| Cycle life | 600+CYCLES |
| Operating Temperature | Charge Operatng Temperature:0~45ºC Discharge Operating Temperature:-20~55ºC |
| Storage Temperature | ≤1months:-20~45ºC ≤6months:-20~35ºC |
| Cell Weight | Approx.220±5g |
warning
1. Charge current for a single cell should be less than the maximum charge current specified in this cell specification.
2. Charge voltage for a single cell shall be less than that specified in this cell specification. Higher charge voltage must be strictly prohibited. The charger and protection circuit of battery pack shall be designed to comply with this voltage limitation.
3. Cells shall be charged according to the temperature condition specified in this cell specification. Charging at temperature lower or higher than the specified temperature windows shall be prohibited.
4. Reverse charge is prohibited. Reverse charge will damage the cells ' chemical system, and may lead to gassing, over-heat, fast capacity degradation, and even catching fire.
5. Cell is prohibited to be charged when its voltage is 0V.
6. Discharge current shall be not over the maximum discharge current specified in this cell specification. Higher discharging current may cause cell over-heat and fast capacity degradation.
7. Cells shall be discharged according to the temperature condition specified in this cell specification.
...
Brief introduction of our company:
Shenzhen Enbar Technology Co., Ltd. is a set of battery research and development, production, sales, technical service in one of the high-tech enterprises.
Shenzhen Enbar Technology enterprise, mainly engaged in the development and manufacturing of lithium batteries, UAV high rate batteries, ultra-thin LiMnO2 batteries and non-rechargeable LiMnO2. LiSOCI2. Nickel-manganese (AA, AAA, SC, C, D), lithium polymer batteries, battery packs, etc. can be customized according to customer requirements. Whether the battery needs to be used as a primary power source or a backup power source for your device, our team of specialist engineers will work closely with you to ensure you get the right battery solution for your requirements.
Our products apply to wide fields, such as intelligent IC card, active RFID, GPS system, communication medical equipment, electricity, transportation, radio&television and industrial equipment, Medical Apparatus, Gas Meters, digital imaging, ventilators, drones, hearing AIDS, electronic stethoscopes, mobile ECG monitors, anesthesia machines, water purifiers, rehabilitation equipment, blood sugar machines Instrument, thermometer, defibrillator, blood routine analyzer, electrocardiograph, oximeter, Kinds of Navigators, beauty massage fitness equipment, etc.
Whatever battery you need, you can customize it here!
