Audited Supplier
Stretch Film is made of Linear Low-density polyethylene(LLDPE) ,Co-extruded 5-layers film,self adhesive layer.It is especially used for palletizing and transportation of goods. It can give full play to the strength, toughness and self-adhesive of the adhesive film, and cooperate with the tightening effect of layer by layer tension when winding, so as to achieve the best effect of palletizing.
| Material | LLDPE |
| Type | Hand Stretch Film |
| Usage | Package |
| Feature | Good adhesion,best elongation,Puncture resistance |
| Place of Origin | Henan, China |
| Hardness | Soft |
| Processing Type | Cast or Blow Molding |
| Transparency | TRANSLUCENT |
| Color | Black,white,transparent,customized |
| Length | 100m-5000m |
| Thickness | 10micron-40micron |
| Width | 50mm--1500mm |
| Raw material | 100% Virgin LLDPE |
| Weight | 1kg-50kg |
| Elongation | Standard 200% High 350% Very High 500% |
We offer a variety of packaging modes: roll packaging, pallet packaging, carton packaging, and support packaging customization, printed logos,Carton customization, paper tube printing, custom labels, and more.
1. Prepare the article to be wrapped.
2. Open the PE wrap package and locate the starting end of the film.
3. Secure the start of the film at the edge of the article and hold it with your hand or fingertips to ensure that itdoes not come loose.
4. Start wrapping the film gradually around the article. A certain amount of tension can be maintained during the winding process to ensure that the package is secure.
5. As needed, the film can be cross-wound in different directions to increase the stability and protection of the package.
6. Make sure to cover all surfaces of the item, including the bottom, to achieve an overall packaging effect.
7. At the end of wrapping, secure the end of the film at the edge of the item, either with tape or by clamping the end of the film to the surface of the item.
8. If necessary, cut off the excess film to ensure a neat package.
