2 3 4 Independent Outputs Programmable Linear DC Power Supply

2 3 4 Independent Outputs programmable linear DC Power Supply

Instek GPP-1326 Single-Channel Programmable DC Power Supply, 32V/3A, 192W
The Instek GPP1326 Single-Channel Programmable DC Power Supply, 32V/3A, 192W provides high program resolution (1mV/0.1mA) and read back resolution (0.1mV/0.1mA), as well as optimal low-ripple noise characteristics ?350uVrms/?2mArms and output transient recovery capability ?50S. Independent output on-off switch is provided for each channel.|The GPP-1326 offers a variety of display modes, including single or multi-channel setting values, measurement values, and waveform displays. The Monitor function of this model allows users to set monitoring conditions according to requirements, sound alarms or stop output during the measurement process, and stop measurement and protect the customer's DUT. The GPP-1326 provides output recorder function, which records the voltage/current of the output process to the internal memory, and the result can be stored as a (*.REC) or (*.CSV) file, which can then be transferred to the USB flash drive. The stored *.CSV can be exported to the Excel to conduct the future analysis.|The intelligent temperature-controlled fan can adjust the speed according to the temperature of the power transistor so as to reduce unnecessary noise. The output value setting and the Sequence/Delay/Recorder functions provide 10 sets of internal memory for use, and can be loaded/stored using a USB flash drive. In addition to the standard RS-232 and USB remote interfaces, this model also has an optional LAN or LAN+GPIB interface to facilitate different requirements. The commands of the GPP-1326 conform to SCPI requirements and are compatible with the commands of the GPD-X303S Series.

• Single Output
• 32V/3A, 192W
• 4.3" TFT LCD display
• Supports Setting Value, Measurement Value, and Output Waveform Display
• Load Function (CC, CV, CR Mode)