Audited Supplier
2.4G 300Mbps Outdoor Wireless CPE 1*WAN 4*LAN with 802.3af 48V POE Out on LAN 1 Port
Product Description
CPE300-F210 is an 2.4G, 11N 300Mbps high-performance, high-speed, long range and multiple ports wireless network bridge. With panel 10dBi antenna, it has a transmission distance of 1.5KM far away, with PoE out function, is widely used for CCTV/IP camera for stable wireless data transmission.
Main Features:
Multiple ports support PoE input and PoE output
There are 4 * 10/100Mbps RJ45 ports, WAN port support 24V/48V PoE input; LAN1 port support IEEE 802.3af/at PoE output.
Outdoor Water-Proof/ Surge protection/ Long Range Distance.
Support IP65 water-proof and surge protection, it can install in outdoor harsh environment with stable long range wireless data transmission. With high gain antenna, the PTP/PTMP distance up to 1.5KM.
LED Display and Button Press to Bridge.
With visible LED display to show host/ client mode/ signal strength/ IP address, then with H/ C button, press it to change the host/ client mode for quickly point to point and point to multi-point wireless connection, simple to install and degu, cost saving.
product model | CPE300-F210 | ||||
CPU | MT7628DAN | ||||
Flash | 8MB | ||||
DDR 2 | 64MB | ||||
The 2.4G working frequency band | 2.4GHz - 2.484GHz | ||||
2.4G WIFI transmission protocol | 802.11b / g / n | ||||
Built-in antenna | Directional flat plate antenna, Gain: 10dBi | ||||
top speed | 300Mbps | ||||
2.4G wireless power | 802.11b | 11M | 19±1dBm | 1M | 21±1dBm |
802.11g | 54M | 17±1dBm | 6M | 19±1dBm | |
802.11n HT20 | MCS7 | 16±1dBm | MCS0 | 18±1dBm | |
802.11n HT40 | MCS7 | 15±1dBm | MCS0 | 17±1dBm | |
2.4G receiving sensitivity | 802.11b | 11M | -85dBm | 1M | -94dBm |
802.11g | 54M | -72dBm | 6M | -90dBm | |
802.11n HT20 | MCS7 | -70dBm | MCS0 | -88dBm | |
802.11n HT40 | MCS7 | -68dBm | MCS0 | -86dBm | |
2.4G EVM | 802.11b:≤-10 dB ;802.11g: ≤-25 dB ;802.11n: ≤-28 dB | ||||
frequency deviation (ppm) | ±20ppm | ||||
WAN | 1*10/100M WAN port that supports 24V/48 POE input | ||||
LAN | 1*10/100M LAN port, can supports 48V POE output(Optional) 2* 10/100M LAN ports for data. | ||||
DC | 12V 0.5A | ||||
Buttons | Reset (long press of 6-10 seconds to restore factory default configuration) S, F buttons for LED display | ||||
Status indicator light | WAN port, LAN port, system, WiFi, signal lights. | ||||
maximum power dissipation | < 6W | ||||
Wave surge, test | difference module:±2KV | ||||
product size | 190mm*110mm*50mm | ||||
work environment | Normal operating temperature: -20°C to 55°C; storage temperature: -40°C to 70°C; humidity: 5%~95% (no condensation) | ||||
Working Mode | AP, repeater |
Wireless Functions | Multiple SSID up to 4 |
Support SSID hidden | |
Wireless Security: Open, WPA, WPA2PSK_TKIPAES, WAP2_EAP, | |
Support MAC filter | |
Support RF power adjustable, adjust the RF power based on environment. | |
Device Management | Back-up the configuration |
Restore the configuration | |
Reset to factory default | |
Reboot the device: including time reboot or reboot immediately | |
Admin management password modify | |
Firmware upgrade | |
System log | |
Support firmware GUI web management, AC controller management, remote management and cloud management | |
Protocols | IPv4 |
