Audited Supplier
KH-XJ-MS001
Contact Customer Service
Lifetime Warranty
Steel
ISO10012, BSCI, GMP, GSV, ISO13485, OHSAS18001, ISO14001, ISO/TS16949, ISO9001
Volkswagen, WuLing, Benz, Volvo, Trailer
Rear
Yes
Suspension
6 mm, 8 mm, 10 mm
50 mm, 60 mm, 70 mm
Ke-Hui
Standard Package Meet International Requirements
American German suspension Single-point suspe
Shan Dong
87169000
Product Description
AMERICAN TYPE STANDARD SUSPENSION SERIES
Schematic diagram of American standard suspension 2-axis
Note:
1. Select heavy-duty, standard, or lightweight suspension based on customer requirements;
2. "A1, A2,3" are the dimensions when unloaded;
3. "B1, B2, B3" are the dimensions at rated load;
4. The number of leaf can be chosen, axle spacing of 1310/1360 is selectable, and the height difference of front, middle, and rear brackets adjustable;
5. Suspension accessories are selected based on the type of round or square axle;
6. The dimensions shown in the figure are for reference only, and actual dimensions shall prevail.
The semi-trailer suspension is a critical component that connects the semi-trailer's driving system to the chassis. All forces are transmitted through the suspension, which can mitigate the impact of rough roads on the vehicle, providing a damping effect and enhancing the vehicle's ride comfort. The semi-trailer suspension is widely in various types of trailers, including skeleton trailers, low-bed trailers, flat-bed trailers, self-unloading trailers, car transport trailers, oil tank trailers, box, full trailers, wood transport trailers, and agricultural vehicles. The types of suspensions include German series suspensions, American series suspensions, bogie/swingensions, air suspensions, and rigid suspensions.
Note:
1. "A" is the dimension when unloaded;
2. "B" is the dimension when carrying rated load; .
3.The number of leaf springs is selectable;
4. The side plate thickness of 8mm/10mm is selected according to customer's requirement;
5. The dimensions shown in the figure are for reference only, the actual dimensions shall prevail, and no notice will be given for product updates.Technical Parameters Table for ZX/XJ.Q3.3 Type Three-Axis 10-Leaf (13x75x10) Suspension Series
Note:
1. "A1, A2, A3" are the dimensions when unloaded;
2. "B1,, B3" are the dimensions when carrying rated load;
3. The number of leaf springs is selectable;
4. Suspension accessories are selected according to the of round shaft and square shaft;
5. The dimensions shown in the figure are for reference only, the actual dimensions shall prevail, and no notification will be for product updates.
Schematic diagram of American standard suspension 2-axis
| Model | Height of towing plate (mm) | A1 (mm) | A2 (mm) | H (mm) | Axle Loading (kg) | Replacement |
| KH2183908601 | 1180 | 473 | 465 | 183 | 16,000 * 2 | FW860201A |
| KH2223908601 | 1220 | 513 | 505 | 223 | 16,000 * 2 | FW860202A |
| KH2253908601 | 1250 | 543 | 535 | 253 | 16,000 * 2 | FW860203A |
| KH2164908601 | 1180 | 454 | 446 | 164 | 16,000 * 2 | FW860201B |
| KH2204908601 | 1220 | 494 | 484 | 204 | 16,000 * 2 | FW860202B |
| KH2234908601 | 1250 | 526 | 518 | 234 | 16,000 * 2 | FW860203B |
Note:
1. Select heavy-duty, standard, or lightweight suspension based on customer requirements;
2. "A1, A2,3" are the dimensions when unloaded;
3. "B1, B2, B3" are the dimensions at rated load;
4. The number of leaf can be chosen, axle spacing of 1310/1360 is selectable, and the height difference of front, middle, and rear brackets adjustable;
5. Suspension accessories are selected based on the type of round or square axle;
6. The dimensions shown in the figure are for reference only, and actual dimensions shall prevail.
The semi-trailer suspension is a critical component that connects the semi-trailer's driving system to the chassis. All forces are transmitted through the suspension, which can mitigate the impact of rough roads on the vehicle, providing a damping effect and enhancing the vehicle's ride comfort. The semi-trailer suspension is widely in various types of trailers, including skeleton trailers, low-bed trailers, flat-bed trailers, self-unloading trailers, car transport trailers, oil tank trailers, box, full trailers, wood transport trailers, and agricultural vehicles. The types of suspensions include German series suspensions, American series suspensions, bogie/swingensions, air suspensions, and rigid suspensions.
| model | KH.GF.140 | KH.GF.155 | KH.GF.210 |
| H(mm) | 140 | 155 | 210 |
| A(mm) | 470 | 480 | 540 |
| B(mm) | 440 | 450 | 510 |
1. "A" is the dimension when unloaded;
2. "B" is the dimension when carrying rated load; .
3.The number of leaf springs is selectable;
4. The side plate thickness of 8mm/10mm is selected according to customer's requirement;
5. The dimensions shown in the figure are for reference only, the actual dimensions shall prevail, and no notice will be given for product updates.
Technical Parameters Table for ZX/XJ.Q3.3 Type Three-Axis 10-Leaf (13x75x10) Suspension Series| Suspension model | A1(mm) | B1(mm) | A2(mm) | B2(mm) | A3(mm) | B3(mm) | H(mm) | Load capacity[Kg) |
| KH.Q3-H.3 | 465 | 430 | 465 | 430 | 465 | 430 | 125 | 11000x3(2/1) |
| KH.Q3-M.3 | 440 | 405 | 440 | 405 | 440 | 405 | 125 | 11000x3(2/1) |
| KH.Q3-L.3 | 415 | 380 | 415 | 380 | 415 | 380 | 125 | 11000x3(2/1) |
| KH.Q3-HML.3 | 465 | 430 | 440 | 405 | 415 | 380 | 125 | 13000x3(2/1) |
1. "A1, A2, A3" are the dimensions when unloaded;
2. "B1,, B3" are the dimensions when carrying rated load;
3. The number of leaf springs is selectable;
4. Suspension accessories are selected according to the of round shaft and square shaft;
5. The dimensions shown in the figure are for reference only, the actual dimensions shall prevail, and no notification will be for product updates.
