Audited Supplier
CR-601ST
Physiological Functions of Diagnosis and Monitoring Equipment
Biochemistry Analyzer
CE, FDA, ISO13485
Pathologist
CRAFTEK
Carton
576(L) x478(W) x286(H)mm
China
9027900000
Product Description
You can view video of our microtome in Youtube:
https://youtu.be/3s3WeHQ12h4
The Pathology Standing Committee of the China Association of Medical Equipment
Our microtome is used in many hospitals:
Des.:This machine can be operated with 2 modes: panel control mode, and 2nd hand wheel control mode.
Rotate the 2nd smaller hand wheel (which controls the servo motor in the machine) at the left side of the instrument clockwise or counter-clockwise, to enable fast movement of the specimen feed or retraction. It imitates a fully manual operating machine. This function meets the requirements of skillful operators, and improving the work efficiency greatly.
The operators can also press the buttons on the panel to enable the movement of specimen feed or retraction, like a standard semi-automatic instrument does.
The operators can work alternatively with the two control modes.
Product Info
This machine can be operated with 2 modes: panel control mode, and 2nd hand wheel control mode.
Rotate the 2nd smaller hand wheel (which controls the servo motor in the machine) at the left side of the instrument clockwise or counter-clockwise, to enable fast movement of the specimen feed or retraction. It imitates a fully manual operating machine. This function meets the requirements of skillful operators, and improving the work efficiency greatly.
The operators can also press the buttons on the panel to enable the movement of specimen feed or retraction, like a standard semi-automatic instrument does.
The operators can work alternatively with the two control modes.
Technical specification:
Sectioning thickness range: 0.5~100μm
Setting values: from 0.5~5μm in 0.5μm increments
from 5~20μm in 1μm increments
from 20~50μm in 5μm increments
from 50~100μm in 10μm increments
Trimming thickness range:1~600μm
Setting values:from 1~10μm in 1μm increments
from 10~20μm in 2μm increments
from 20~50μm in 5μm increments
from 50~100μm in 10μm increments
from 100~600μm in 50μm increments
Object feed: 24±1mm
Vertical specimen stroke: 70±1mm
Specimen orientation:horizontal: ±8°, vertical: ±8°
Specimen retraction:5 - 100 μm,in 5 μm increments, can be turned off
Thickness summing up function
Electric coarse feed:20 μm/click and 1000(2000)μm/s
Blade holder base movement:± 24 mm
Maximum specimen size (L x H x W):50 x 60 x 40mm
Dimensions basic instrument:
Width (incl. 2 handwheels on both sides):478mm
Depth (incl. waste tray):576mm
Height:286mm
Net Weight :29 kg
Work temperature:+10ºC~+35ºC
Work humidity:<80%, no condensation water
Nominal supply voltages:100~240V AC (±20V)
Nominal frequency:50/60 Hz
Power draw:70W
https://youtu.be/3s3WeHQ12h4
The Pathology Standing Committee of the China Association of Medical Equipment
Crowner and microtome provider of the 1st Paraffin Section Quality Control Competition hosted by the Pathology Standing Committee of the China Association
of Medical Equipment
Company Introduction
Jinhua Craftek Instrument Co., Ltd. is located in Jinhua City, Zhejiang Province,a vibrant national economic development zone. It's a company with cutting-edge R & D team of pathology equipment and other medical equipment . The company is committed to the development of the industry's high-end sophisticated products, independent research and development of scientific and technological innovation as the core competitiveness, attention to independent intellectual property rights construction, establish a "Quality of China" boutique strategy, dare to become world-class products .Company Introduction
Our microtome is used in many hospitals:
Des.:This machine can be operated with 2 modes: panel control mode, and 2nd hand wheel control mode.
Rotate the 2nd smaller hand wheel (which controls the servo motor in the machine) at the left side of the instrument clockwise or counter-clockwise, to enable fast movement of the specimen feed or retraction. It imitates a fully manual operating machine. This function meets the requirements of skillful operators, and improving the work efficiency greatly.
The operators can also press the buttons on the panel to enable the movement of specimen feed or retraction, like a standard semi-automatic instrument does.
The operators can work alternatively with the two control modes.
Product Info
This machine can be operated with 2 modes: panel control mode, and 2nd hand wheel control mode.
Rotate the 2nd smaller hand wheel (which controls the servo motor in the machine) at the left side of the instrument clockwise or counter-clockwise, to enable fast movement of the specimen feed or retraction. It imitates a fully manual operating machine. This function meets the requirements of skillful operators, and improving the work efficiency greatly.
The operators can also press the buttons on the panel to enable the movement of specimen feed or retraction, like a standard semi-automatic instrument does.
The operators can work alternatively with the two control modes.
Technical specification:
Sectioning thickness range: 0.5~100μm
Setting values: from 0.5~5μm in 0.5μm increments
from 5~20μm in 1μm increments
from 20~50μm in 5μm increments
from 50~100μm in 10μm increments
Trimming thickness range:1~600μm
Setting values:from 1~10μm in 1μm increments
from 10~20μm in 2μm increments
from 20~50μm in 5μm increments
from 50~100μm in 10μm increments
from 100~600μm in 50μm increments
Object feed: 24±1mm
Vertical specimen stroke: 70±1mm
Specimen orientation:horizontal: ±8°, vertical: ±8°
Specimen retraction:5 - 100 μm,in 5 μm increments, can be turned off
Thickness summing up function
Electric coarse feed:20 μm/click and 1000(2000)μm/s
Blade holder base movement:± 24 mm
Maximum specimen size (L x H x W):50 x 60 x 40mm
Dimensions basic instrument:
Width (incl. 2 handwheels on both sides):478mm
Depth (incl. waste tray):576mm
Height:286mm
Net Weight :29 kg
Work temperature:+10ºC~+35ºC
Work humidity:<80%, no condensation water
Nominal supply voltages:100~240V AC (±20V)
Nominal frequency:50/60 Hz
Power draw:70W
