Audited Supplier
300DF
CE
New
Diesel Engine
>300mm
>200m
DTH Bit, Tricone Bit, PDC Bit, Drag Bit, etc.
Rotary Drilling, Air Drilling, Mud Pump Drilling
Drilling Machine
Glorytek
Standard Exporting Packing
CE
Beijing, China
Product Description
Truck Water Well Drilling Rig Machine with Good Price
Product Description
Main Specification of 300DF Truck Mounted Water Well Drilling Rig
Nominal drilling depth (M) | 300 | ||
Through hole diameter of turntable (mm) | 500 | ||
Turntable speed (r/min) | 8.6-142 | ||
Turntable torque (kN.m) | 38.9-2.4 | ||
Single rope pulling force of main winch (kN) | 30 | ||
Main hook lifting capacity (kN) | 240 | ||
Single rope pulling force of auxiliary winch (kN) | 30 | ||
Lifting force of secondary hook (kN) | 120 | ||
Drill tower bearing capacity (kN) | 240 | ||
Effective height of drilling tower (mm) | 11900 | ||
Kelly rod (mm) | Φ108×108×7500 | ||
Drill rod (mm) | Φ88.9×9.8×5500 | ||
Power | Generator model | HH100/R6105AZLD-1 100kW | |
Main rig | Y225S-4 37kW/1470rpm | ||
Mud pump | Y225S-4 37kW/1470rpm | ||
Hydraulic pump | YE2-160M-4 11kW/1470rpm | ||
Mud pump | Model | BW850/20 | |
Bore (mm) | 150 | ||
Displacement (L/min) | 850, 600 | ||
Pump pressure (MPa) | 2, 3 | ||
Input power (kW) | 40 | ||
Truck chassis | Chassis model | DFS1251GL18 | |
Chassis form | 6×4 | ||
Engine | model | YC6J180-33 | |
Type | Water-cooled four-stroke supercharged and inter-cooled | ||
Rated power (kW) | 132 | ||
Rated speed (rpm) | 2500 | ||
Dimension | Working status (mm) | 10500×2480×13700 | |
Transport state (mm) | 12500×2480×3700 | ||
Pictures of 300DF Truck Mounted Water Well Drilling Rig
Type: Truck Water Well Drilling Rig
Model: 300DF
Main features:
300DF truck mounted water well drilling rig is a direct circulation rotary drilling rig. The drilling rig uses the Dongfeng 6×4 special drilling rig chassis, the model is DFS1251GL18, the emission standard is China III, and the 11.00R20 steel wire cross-country pattern tires are used, which has good off-road performance.
The drilling rig has a compact structure, and the chassis engine is Yuchai YC6J180-33 diesel engine, emission of China III, 132kw/2500rpm with strong power.
The drilling rig uses an independent diesel generator set as the power when drilling, and the mechanical hoist and the turntable work at the same time through the motor drive.
The drilling rig is equipped with mechanical double winches. The main and auxiliary hydraulic winches have the characteristics of large lifting force and fast lifting speed, which can meet the needs of normal drilling and have the ability to deal with general accidents in the well.
The hydraulic oil cylinder controls the advance and retreat of the wellhead card board to close the insurance card board to block or release the drill pipe joint.
Pneumatic integrated design realizes pneumatic remote control BW850/2A mud pump clutch, with high degree of automation, simple and labor-saving operation.
The rig is equipped with 4 hydraulic legs and two mechanical legs. The piston rod of each oil hydraulic leg cylinder equipped with thread and a lock nut. After the drilling rig is leveled, the oil cylinder can be locked with lock nut. In this way, even if the oil cylinder leaks, the chassis will not lose stability.
The turntable is a paddle type, which is internally driven by a spiral arc gear, and the torque transmitted is large, which is twice that of similar drilling rigs all over the world.
The hydraulic system adopts an open system, and the operation of getting on and off the car is separated to avoid misoperation. It is equipped with oil temperature heater in winter and oil temperature radiator in summer to adapt to the heating and heat dissipation of hydraulic oil in different seasons.
The drilling rig is equipped with an auxiliary rod unloading cylinder, which is used to push the ratchet teeth of the rotary table to unload the thread of the drill pipe joint, and then use the rotary table to reverse the unloading rod to prevent the impact force from damaging the rig gearbox when unloading the rod.
Packing and Transport
Packing: Seaworthy Packing
Delivery: about 30 days after your down payment.
Company Profile
Glorytek Industry (Beijing)Co.,Ltd., located in Beijing,China, is an integrated corporation specialized in manufacturing and exporting top quality drilling equipment and drilling parts for decades. We are supported and assisted by a highly experienced team of designers and engineers that enable us to complete all the assigned projects successfully as per the specified requirement from our clients.
Our products are widely used in the scope of mining, water well drilling and exploration, anchor grouting project, side slope protection engineering, oil and gas engineering,underwater rock drilling & blasting operations of seaport channel, hydropower project, national defense projects ect.
ExhibitionCertifications
Customer Photos
After-sale Warranty
(1)Within the period of the first year after delivery, the main parts are guaranteed to be supplied free of charge once the problem caused by the quality issue.
(2) Service at working site: If need, our technical engineer can be dispatched to the working site for technical service, but the expense of ticket, accommodation, diet, service charge shall be on buyer's account.
(3)Timely after-sale assistance shall be provided all the time.
FAQ
Q: Are you original manufacturer or trading company?
A: We are an integrated corporation specialized in manufacturing and exporting.
Q: Can you supply related drilling tools?
A: Yes, we can supply full set of drilling tools, such as drill pipe, tricone bit, PDC bit, drag bit, DTH hammer and bit. Moreover, we have drilling equipments like mud pump, air compressor, etc. as well.
Q: Which payment terms can you accept?
A: Normally we prefer 30% advance payment after purchase order by T/T, 70% remaining payment before shipping by T/T.
Q: How is your delivery time?
A: This will depend on your purchasing quantity. Normally we can deliver within 30days.
Q: How can you ensure the quality?
A: We have our professional QC and all the products will be strict inspection and testing for every order before shipping out.
Contact Us
Jane Cheng
Sales Representative
Glorytek Industry ( Beijing ) Co., Ltd.
Address:No.B-2507, DongWeiCheng, GuanZhuang,Chao Yang District, Beijing, China.
Website: glorytek.en.made-in-china.com / glorytek.en.made-in-china.com
