Audited Supplier
201-200/350/1000CST
63148-62-9
C6h18osi2
618-493-1
Transparent
Liquid
Industrial
Transparent
Chemical Auxiliary Agent
Industrial Grade, Food Grade, Cosmetic Grade
Polydimethylsiloxane
99.9%
Coating Auxiliary Agents, Electronics Chemicals, L
ZINCA
Drums/IBC
25kg/200kg/1000kg IBC drum
Anhui. China
3910000
Product Description
Product Description
Performance and use:
Product Name:Silicone Fluid / Polydimethylsiloxane / PDMS Polydimethylsiloxane / Dimethyl Silicone Oil / Methyl Silicone Oil /Dimethicone / Simethicone
CAS No.: 63148-62-9
Appearance: Clear, Colorless and Odorless linear 100% Polydimethylsiloxane Silicone Fluids / PDMS Silicone Oil
Viscosity Range: From 0.65cSt to 1 million cSt
Chemical Name: Polydimethylsiloxane / PDMS / Silicone Fluid / Silicone Oil
CAS No. 63148-62-9, CAS No 9006-65-9
Availability: 200 KG / Iron Drum, 200 KG / Plastic Drum, 1000 KG / IBC Tank
Product Description: Super Low Viscosity Pure Silicone Fluids are clear, colorless, and odorless linear Polydimethylsiloxane fluids / PDMS Silicone Oils that range in viscosities from 0.65cSt (thinner than water) to 2cSt
Due to their low molecular weight and refractive index values, Low Viscosity Pure Silicone Fluids are widely used in Optics research, LED technologies & Sensor technologies.
Applications Include:
* Laboratory Bath Fluids
* Heat Transfer Fluids
* Dielectric Fluids
* Low Viscosity Damping Fluids
* ORC Turbo Generator Fluids
* Fast evaporating fluids for Personal
* Care formulations
* Low MW Fluids for Research
* Low Viscosity Hydraulic Fluids
* Refractive Index Matching Fluids
* RI Matching Fluids for LED and Optics
* Low Dielectric Constant Fluids for Photonics
* VOC Exempt Fluids for Renewable Energies
* Lubricants for Plastic Parts
* Lubricants for Rubber Parts
* Ozone Safe Solvents
* High Pressure Fluid
* High Compressibility Fluids
CAS No.: 63148-62-9
Appearance: Clear, Colorless and Odorless linear 100% Polydimethylsiloxane Silicone Fluids / PDMS Silicone Oil
Viscosity Range: From 0.65cSt to 1 million cSt
Chemical Name: Polydimethylsiloxane / PDMS / Silicone Fluid / Silicone Oil
CAS No. 63148-62-9, CAS No 9006-65-9
Availability: 200 KG / Iron Drum, 200 KG / Plastic Drum, 1000 KG / IBC Tank
Product Description: Super Low Viscosity Pure Silicone Fluids are clear, colorless, and odorless linear Polydimethylsiloxane fluids / PDMS Silicone Oils that range in viscosities from 0.65cSt (thinner than water) to 2cSt
Due to their low molecular weight and refractive index values, Low Viscosity Pure Silicone Fluids are widely used in Optics research, LED technologies & Sensor technologies.
Applications Include:
* Laboratory Bath Fluids
* Heat Transfer Fluids
* Dielectric Fluids
* Low Viscosity Damping Fluids
* ORC Turbo Generator Fluids
* Fast evaporating fluids for Personal
* Care formulations
* Low MW Fluids for Research
* Low Viscosity Hydraulic Fluids
* Refractive Index Matching Fluids
* RI Matching Fluids for LED and Optics
* Low Dielectric Constant Fluids for Photonics
* VOC Exempt Fluids for Renewable Energies
* Lubricants for Plastic Parts
* Lubricants for Rubber Parts
* Ozone Safe Solvents
* High Pressure Fluid
* High Compressibility Fluids
Item | Unit | Result | ||||||
Code name | XJ-200 DM5 | XJ-200 DM10 | XJ-200 DM20 | |||||
Viscosity (25ºC) | cst | 5 | 10 | 20 | ||||
Appearance | Crystal clear | |||||||
INCI | Dimethicone | |||||||
Relative gravity 25ºC(77ºF) | 0.913 | 0.935 | 0.949 | |||||
Refractive index 25ºC(77ºF) | 1.396 | 1.399 | 1.401 | |||||
APHA color | 5 | 5 | 5 | |||||
Flash point (close cup) | ºC | 134(272) | 211(411) | 246(474) | ||||
Melt point | ºC | <-70 | <-60 | <-52 | ||||
Pour point | ºC | -100(-148) | -100(-148) | -84(-119) | ||||
Surface tension 25(77ºF) | dynes/cm | 19.7 | 20.1 | 20.6 | ||||
Viscosity-temperature coefficient | 0.55 | 0.56 | 0.59 | |||||
Item | Unit | Result | ||||||
Code name | XJ-200 DM50 | XJ-200 DM100 | XJ-200 DM200 | |||||
Viscosity (25ºC) | cst | 50 | 100 | 200 | ||||
Appearance | Crystal clear | |||||||
INCI | Dimethicone | |||||||
Relative gravity 25ºC(77ºF) | 0.960 | 0.964 | 0.967 | |||||
Refractive index 25ºC(77ºF) | 1.4022 | 1.4030 | 1.4032 | |||||
APHA color | 5 | 5 | 5 | |||||
Flash point (close cup) | ºC | 318 | >326 | >326 | ||||
Melt point | ºC | <-41 | <-28 | <-27 | ||||
Pour point | ºC | -70 | -65 | -65 | ||||
Surface tension 25(77ºF) | dynes/cm | 20.8 | 20.9 | 21.0 | ||||
Viscosity-temperature coefficient | 0.59 | 0.60 | 0.60 | |||||
Item | Unit | Result | ||||||
Code name | XJ-200 DM350 | XJ-200 DM500 | XJ-200 DM1000 | |||||
Viscosity (25ºC) | cst | 350 | 500 | 1000 | ||||
Appearance | Crystal clear | |||||||
INCI | Dimethicone | |||||||
Relative gravity 25ºC(77ºF) | 0.969 | 0.970 | 0.970 | |||||
Refractive index 25ºC(77ºF) | 1.4034 | 1.4035 | 1.4035 | |||||
APHA color | 5 | 5 | 5 | |||||
Flash point (close cup) | ºC | >326 | >326 | >326 | ||||
Melt point | ºC | <-26 | <-25 | <-25 | ||||
Pour point | ºC | -50 | -50 | -50 | ||||
Surface tension 25(77ºF) | dynes/cm | 21.1 | 21.2 | 21.2 | ||||
Viscosity-temperature coefficient | 0.60 | 0.61 | 0.61 | |||||
Factory Show
00:
02:2
02:2
Technical Team
Recommend Products
Recommended by seller
Silicone Oil Zinca 100 1000 12500 cst Methyl Hydrogen Silicone Fluid
$5,000.00 - $5,500.00 / metric ton
1 metric ton
Trimethoxy(methyl)silane CAS NO 1185-55-3 MTMS EINECS NO 214-685-0 Methytrimethoxysilane CH3Si(CH3O)3 cross-linking agent
$1.16 - $1.26 / kilogram
1.0 kilogram
Silicone Oil PDMS with Low Viscosity as 3-10cs CAS NO. 63148-62-9 Poly(dimethylsiloxane) polydimethylsiloxane
$2.18 - $2.60 / kilogram
1.0 kilogram
Factory Produce Methyl Hydrogen Silicone Fluid CAS NO. 63148-57-2
$5.62 - $6.67 / kilogram
1 kilogram
Packing and Payment Terms
Packaging, storage and transportation:
This product is packed in 200L plastic drums, 200L plastic-coated iron drums, rigid plastic composite intermediate bulk containers (IBC) TC1000S, should avoid contact with alkaline substances, prevent acid and moisture, and store in a cool and dry place. This product is a non-dangerous product and can be transported according to the conditions of ordinary goods.
This product is packed in 200L plastic drums, 200L plastic-coated iron drums, rigid plastic composite intermediate bulk containers (IBC) TC1000S, should avoid contact with alkaline substances, prevent acid and moisture, and store in a cool and dry place. This product is a non-dangerous product and can be transported according to the conditions of ordinary goods.
We consistently provide the best products, package and services!
FAQ
Q: Are you a manufactory or trade company?
A: We are a production factory and also a foreign trade company.
Q: How long can I expect to get the sample?
A: 5-7 days under normal conditions.
Q: Do you provide free samples?
A: Yes, we can offer free sample, you just need to pay the shipping.
Q: How long is your delivery time?
A: We can deliver the goods within 7-20 days.
Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q: Is there a discount ?
A: Yes, for larger quantity, we always support with better price.
Q: How to start orders or make payments ?
A: You can send our your Purchase order ( if your company has ), or just send a simple confirmation by email or by Trade Manager,
and we will send you Proforma Invoice with our bank details for your confirmation, then you can make payment accordingly.
A: We are a production factory and also a foreign trade company.
Q: How long can I expect to get the sample?
A: 5-7 days under normal conditions.
Q: Do you provide free samples?
A: Yes, we can offer free sample, you just need to pay the shipping.
Q: How long is your delivery time?
A: We can deliver the goods within 7-20 days.
Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q: Is there a discount ?
A: Yes, for larger quantity, we always support with better price.
Q: How to start orders or make payments ?
A: You can send our your Purchase order ( if your company has ), or just send a simple confirmation by email or by Trade Manager,
and we will send you Proforma Invoice with our bank details for your confirmation, then you can make payment accordingly.
