Audited Supplier
skp-1
Vacuum Feeding Machine
Fully Automatic
Powder
Can Be Customized
Stainless Steel Hopper
Capacity Cup
Servo Motor Filling
Chute Pneumatic Combination Lifting
Linear
Wooden
Wooden
Single Lane Coffee Capsule Filling Machine
CE
15-30 PCS Per Minute
2035*670*1920mm
0-20g
Nespresso K-Cup Dolce Gusto
Coffee Power, Tea, Milk Powder
560kg
PLC
Servo Motor
Sunyi
Wooden Packing
580kg
China
8422303090
Product Description
2022 Automatic aluminum Nespresso coffee capsule filling machine
Dear Client ,we also can supply empty nespresso ,aluminum nespresso ,k-cup ,if need please contact me
This is one set high speed rotary coffee capsule filling and sealing machine. It is our new generation upgrade product on the basis of our Minhua company of old machine. Which is the first domestic high-speed rotary coffee capsule packaging machine. The maximum speed of the machine reaches 15-30 capsules per minute. At the same time ,With the advanced electrical equipment, appearance and safety design, it has achieved world-class standards.
parameter
| MODEL | skp-1 |
| Filling Range | 0-20g |
| Filling Accurancy | +-0.05-0.15g |
| Speed | 15-30pcs per minute |
| hopper capacity | 1.0L(2.5L)customized 110L |
| Control System | PLC |
| Display | 7 inch Touchscreen |
| Power Supply | AC220V/380v 50hz/60hz 2.5kw |
| Dimension | 2035*670*1920MM |
| weight-net | 580kg |
| wight-gross | 620kg |
detail function
1.coffee capsue feeding Automatic empty cups loading device,horizontal design, it can accommodate 500 capsules,Adopt air claw to feed capsule, stable and accurate. Machine use premade cup. Cup sensor "no cup no filling
2.capsules sensor:,if detect no capsules,no filling and no sealing
3.Nitrogen injection station:Additional Nitrogen gas flush device to increase coffee shelf life. Nitrogen tunnel from capsule feeding station to sealing station. Note:prepare nitrogen generator machine or nitrogen cylinder by customer
4.Automatic vacuum material feeding machine:utomatically transfer powder through pipe from holding floor tank to 15L auger hopper. Keep Permanent nitrogen level inside system
5.Filling station: high speed four servo driven auger filler mounted on top of the machine, separated controlled by PLC touch screen, the weight adjustable by touch screen.
6.Press down station: Press down coffee powder after filling process to remove overflow coffee to get a flat surface. Meanwhile, this device will suck the dust on capsule rim to filter Jar.
7.Foil station: Die-cutting aluminum foil lids pick and place device.
8.Heat sealing station: Pneumatically driven heat seal device. OMRON temperature controller to adjust temperature
9.Cutting film system:Cutting roll aluminum film and form circle lids, and at the same time, sealing lids on the capsule's top
10.Discharge station :Swing manipulator output finished capsules to outside container
Samples
Contact
