Audited Supplier
Rough Terrain Electric Stacker
Lifting Height:
Single mast: 1.6m
2-stage mast:2.0m,2.5m,3.0m &3.5m
This is an all-terrain outdoor electric pallet stacker, with a sturdy and stable structural design. It is suitable for rough outdoor surfaces such as construction sites and muddy areas.
Advantages:
Pump brand: Bucher;
24V/120Ah gel maintenance-free battery;
AC 1.5kW horizontal drive motor;
Wheel: Solid Rubber;
Adaptable to rough terrain;
Solid structural design.
The specification of Small Electric Pallet Jack
| Model | CDD-H | |||
| Maximum load capacity | 1500/2000kg | |||
| load center | 500mm | |||
| Travel speed without load/with load | 3.5/3km/h | |||
| Lifting speed without load/with load | 110/80mm/s | |||
| Lowered speed without load/with load | 100/100mm/s | |||
| Ascend slope ability without load/with load | 8/6% | |||
| Overall length/width of frame | 1730/1570 | |||
| Wheelbase | 1178mm | |||
| Fork size(length *width*thickness) | 1070*100*35mm | |||
| Fork outside width | 210-960mm | |||
| Min frounf height | 50mm | |||
| Fork lowered height | 130mm | |||
| Minimum turning radius | 1355mm | |||
| Minimum intersecting aisie | 2340mm | |||
| Front wheel | 375*115mm | |||
| Drive wheel | 300*90mm | |||
| Drive motor Rated output/DC motor | 1.5kw | |||
| Hoist motor Rated output/DC motor | 2.2kw | |||
| Battery Voltag/Capacity | 24/120V/Ah | |||
| Battery Weight | 35*2kg | |||
| Mast | Max.Lifting height | Mast overall height | Height mast extended | Service weight |
| Single mast | 1600 mm | 2080 mm | 2080 mm | 735 kg |
| 2-stage mast | 2000 mm | 1580 mm | 2550 mm | 755kg |
| 2500 mm | 1830 mm | 3050 mm | 790 kg | |
| 3000 mm | 2080/1980 mm | 3550/3450 mm | 820 kg | |
| 3500 mm | 2330 mm | 4050 mm | 850 kg | |
1.Germany system technology of warehousing equipment and leading international level.
2. The product with the principle of human engineering, fully humanized design.
3. The equipment using the German imports of seal, bearing and electrical components,further to ensure the reliability of the vehicle.
4. Using USA or Italy electronic assembly control, the German import control handle and Italy Metalrota driving wheel,and fully guarantee the stability of vehicle.
5. With strict accordance of ISO9000 and CE standards for product development and production,ensure product quality.
6. Flexible and convenient operation, energy saving and environmental protection, vehicle low noise,stable operation, high safety coefficient.
7. Large capacity of traction battery for vehicles, and fully guarantee the continuous working time.
8. All sold products enjoy a high quality after sale service, ensure the spare parts supply timely,authenticity and continuity, to solve customer any worry from the later period.
Characteristics
1. AC control system eliminating motor brushes and directional contactors, which minimalzes maintenance requirements.
2. Multi-function display: Battery status, hour meter, fault code etc.
3. Side-way battery with roll-out system is very convenient to replace batteries. The battery upside cover makes you easy to fill the battery.
4. Built-in charger.
5. Emergency reversing device.
After sales service
MYZG always treat after-sale service important as the same as product quality.
MYZG grants our clients a twelve-month-period or 2000-hours warranty for any machine purchased from us.
MYZG can also help clients coordinate with trained service personnel to provide you detailed and extensive knowledge about your specific machine. With our technical advises, your machine service life can be significantly prolonged and sustained with high capacity.
1. What's the Certificate do you have?
MYZG workshop meet with the ISO9001:2008 Quality System. All of our products with CE certificate. Some of our products meets the EPA requirements.
2. Can you customize and design as the clients' requirement?
MYZG will try its best to meet all kinds of clients' special requirements. However, All the customizing and refit should be implemented safely and scientifically. The colors can be painted as client's need.
3. How long is the warranty of your products?
Normally 1 year or 2000 working hours whichever occurs first. Details to see the MYZG warranty policy for each model.
4. Can you produce the products labeled with the client's brand?
With the authorization of the brand, we can OEM for our clients.
5. What's the payment terms do you accept?
On T/T term 30% down payment is required in advance,and 70% balance shall be settled before shipment.
6. What logistics waysd we can work for shipment ?
We can ship construction machinery by various transportation tools.
1. For 90% of our shipment,we will go by sea,to all main continents such as South America,Middle East,Africa,Oceania and Europe etc,either by container or Bulk shipment.
2. For neighborhood countries of China,such as Russia,Mongolia, Kazakhstan,Uzbekistan etc., we can ship trucks by railway.
3. For light spare parts in urgent demand,we can ship it by international courier service,such as DHL,TNT,UPS,or Fedex.
7. Delivery time:
Standard configuration products are always in stock. The production period of Customizing products is 7-15 days.
