Audited Supplier
LX-HZL01-20
Horizontal
Industrial
Dumping Furnace
Aluminum Melting/Fried Aluminum Ash
Gas/Oil
LXXR
10~40t
Guangzhou, China
Product Description
Guangzhou Longxin Regenerative Industrial Furnace Co., Ltd., founded in 2010, is a national high-tech enterprise, specializing in the R&D, design, production, manufacturing, installation, maintenance and technical transformation of renewable aluminum melting and casting processing equipment.
Its main products include aluminum melting furnace and holding furnace, regenerative combustion system, rotary kiln, aluminum chip mechanical pump, vacuum aluminum water transfer device, aluminum liquid degassing equipment, ingot line, casting rod equipment, online monitoring system, etc.
Aluminum Melting Furnace features:
1,Model: fixed furnace, double chamber furnace, side pool aluminum scrap furnace, tilting furnace, rotary furnace
2,Specification: 1.5 tons to 100 tons
3,Melting speed: 3~12t/h
4,Fuel: natural gas, liquefied gas, heavy oil, diesel, tire oil;
5,Raw materials: aluminum ingot, aluminum scrap, scrap aluminum, pop can
6,Equipped with burners: regenerative, top mounted, top mounted, integral and bottom mounted;
The rotary furnace is used for aluminum slag treatment. It can handle cold slag, hot slag and aluminum slag with high iron content. It can not only reduce the manual operation of frying ash, but also ensure higher metal aluminum recovery.
Equipment performance:
Treatment capacity: hot aluminum ash treatment 5 tons/furnace times (cold aluminum slag treatment about 3.5t)
Swing speed:1.5-3 rpm
Processing speed: hot aluminum ash 2-4 hours/furnace times (cold aluminum slag 3-5 hours)
Recovery: rate ≥ 80% (depending on the technical level of operators)
Swing angle: 360 degrees
Drive mode: Guide rail friction drive
Feeding mode: Forklift and semicircular ash hopper
Discharging mode: hydraulic inclined discharging, and discharging by forklift and semicircular ash hopper
Total power: 15-25KW
Drive motor power: 11KW
Hydraulic unit power :7.5KW
Power of automatic refueling device :2.2KW
Combustion gun power: 4KW (optional)
Flue gas temperature at furnace mouth: ≤ 220 ºC
Demand for flue gas treatment capacity: 30000 m ³/ h
Appearance size: 3300 * 4710 * 3260mm
Its main products include aluminum melting furnace and holding furnace, regenerative combustion system, rotary kiln, aluminum chip mechanical pump, vacuum aluminum water transfer device, aluminum liquid degassing equipment, ingot line, casting rod equipment, online monitoring system, etc.
Aluminum Melting Furnace features:
1,Model: fixed furnace, double chamber furnace, side pool aluminum scrap furnace, tilting furnace, rotary furnace
2,Specification: 1.5 tons to 100 tons
3,Melting speed: 3~12t/h
4,Fuel: natural gas, liquefied gas, heavy oil, diesel, tire oil;
5,Raw materials: aluminum ingot, aluminum scrap, scrap aluminum, pop can
6,Equipped with burners: regenerative, top mounted, top mounted, integral and bottom mounted;
The rotary furnace is used for aluminum slag treatment. It can handle cold slag, hot slag and aluminum slag with high iron content. It can not only reduce the manual operation of frying ash, but also ensure higher metal aluminum recovery.
Equipment performance:
Treatment capacity: hot aluminum ash treatment 5 tons/furnace times (cold aluminum slag treatment about 3.5t)
Swing speed:1.5-3 rpm
Processing speed: hot aluminum ash 2-4 hours/furnace times (cold aluminum slag 3-5 hours)
Recovery: rate ≥ 80% (depending on the technical level of operators)
Swing angle: 360 degrees
Drive mode: Guide rail friction drive
Feeding mode: Forklift and semicircular ash hopper
Discharging mode: hydraulic inclined discharging, and discharging by forklift and semicircular ash hopper
Total power: 15-25KW
Drive motor power: 11KW
Hydraulic unit power :7.5KW
Power of automatic refueling device :2.2KW
Combustion gun power: 4KW (optional)
Flue gas temperature at furnace mouth: ≤ 220 ºC
Demand for flue gas treatment capacity: 30000 m ³/ h
Appearance size: 3300 * 4710 * 3260mm
