Audited Supplier
3x. 12
GB, ISO
Framing Nails
Steel
Bright/Galvanized
Full Round Head
21
0.12 Inch
76.2mm
Sm/Sc/R
Manufacturer and Trading Company
Available
Available
KYA
CTN, Plt
3x. 12
Shandong, China
7317000000
Product Description
Product Description:
Plastic collated framing nails, also known as plastic strip nails or plastic collated framing nails, are the most economical type of framing nails. The nails are held together with plastic strip or band to prevent deterioration due to weather conditions or high humidity. The collation are angled to accommodate the overlapping heads, and the angles are available in 0°, 15°, 20°, 21°, 22° and so on. Our plastic collated nails, with smooth, ring or screw shank, are widely used in most wood applications to provide efficient operation and excellent holding power. Besides, there are stainless steel plastic collated nails for cedar or redwood to prevent staining.
Specification:
True image:
Packing&Delivery:
| LENGTH | SHANK DIAMETER | HEAD | POINT | SHANK | COLLATION | FINISH | PCS./BOX |
| 2'' | .113'' | Full Round Head | Diamond | Smooth/Ring/Screw | 21° Angled Strip | Yello Coating/EG/HDG | 6000 |
| 2-3/8" | .113'' | Full Round Head | Diamond | Smooth/Ring/Screw | 21° Angled Strip | Yello Coating/EG/HDG | 5000 |
| 2-3/8" | .120'' | Full Round Head | Diamond | Smooth/Ring/Screw | 21° Angled Strip | Yello Coating/EG/HDG | 4000 |
| 3" | .120'' | Full Round Head | Diamond | Smooth/Ring/Screw | 21° Angled Strip | Yello Coating/EG/HDG | 4000 |
| 3-1/4" | .120'' | Full Round Head | Diamond | Smooth/Ring/Screw | 21° Angled Strip | Yello Coating/EG/HDG | 4000 |
| 2-1/2" | .131'' | Full Round Head | Diamond | Smooth/Ring/Screw | 21° Angled Strip | Yello Coating/EG/HDG | 5000 |
| 3" | .131'' | Full Round Head | Diamond | Smooth/Ring/Screw | 21° Angled Strip | Yello Coating/EG/HDG | 4000 |
| 3-1/4" | .131'' | Full Round Head | Diamond | Smooth/Ring/Screw | 21° Angled Strip | Yello Coating/EG/HDG | 4000 |
| 3-1/2" | .131'' | Full Round Head | Diamond | Smooth/Ring/Screw | 21° Angled Strip | Yello Coating/EG/HDG | 4000 |
| 3-1/2" | .135'' | Full Round Head | Diamond | Smooth/Ring/Screw | 21° Angled Strip | Yello Coating/EG/HDG | 2000 |
| 1-1/2'' | .148'' | Full Round Head | Diamond | Smooth | 21° Angled Strip | Yello Coating/EG/HDG | 6000 |
| 2-1/8" | .148'' | Full Round Head | Diamond | Smooth | 21° Angled Strip | Yello Coating/EG/HDG | 4000 |
| 2-1/4" | .148'' | Full Round Head | Diamond | Smooth | 21° Angled Strip | Yello Coating/EG/HDG | 4000 |
| 2-3/8" | .148'' | Full Round Head | Diamond | Smooth | 21° Angled Strip | Yello Coating/EG/HDG | 4000 |
| 2-1/2" | .148'' | Full Round Head | Diamond | Smooth | 21° Angled Strip | Yello Coating/EG/HDG | 4000 |
| 3" | .148'' | Full Round Head | Diamond | Smooth | 21° Angled Strip | Yello Coating/EG/HDG | 3000 |
| 3-1/4" | .148'' | Full Round Head | Diamond | Smooth | 21° Angled Strip | Yello Coating/EG/HDG | 3000 |
| 4'' | .150'' | Full Round Head | Diamond | Smooth | 21° Angled Strip | Yello Coating/EG/HDG | 1500 |
| 4-1/2" | .150'' | Full Round Head | Diamond | Smooth | 21° Angled Strip | Yello Coating/EG/HDG | 1500 |
| 5-1/8" | .150'' | Full Round Head | Diamond | Smooth | 21° Angled Strip | Yello Coating/EG/HDG | 1500 |
| 3-1/4" | .162'' | Full Round Head | Diamond | Smooth | 21° Angled Strip | Yello Coating/EG/HDG | 1012 |
| 3-1/2" | .162'' | Full Round Head | Diamond | Smooth | 21° Angled Strip | Yello Coating/EG/HDG | 1012 |
| 5-1/8" | .165'' | Full Round Head | Diamond | Smooth | 21° Angled Strip | Yello Coating/EG/HDG | 1012 |
| 6-1/4" | .165'' | Full Round Head | Diamond | Smooth | 21° Angled Strip | Yello Coating/EG/HDG | 1012 |
| 5-4/5'' | .181'' | Full Round Head | Diamond | Smooth | 21° Angled Strip | Yello Coating/EG/HDG | 660 |
| 6-1/4" | .181'' | Full Round Head | Diamond | Smooth | 21° Angled Strip | Yello Coating/EG/HDG | 660 |
Shank Type:
Smooth shank
Smooth shank nails are the most common and are often used for framing and general construction applications. They offer enough holding power for most everyday use.
Ring shank
Ring shank nails offer superior holding power over smooth shank nails because the wood fills in the crevasse of the rings and also provide friction to help prevent the nail from backing out over time. A ring shank nail is often used in softer types of wood where splitting is not an issue.
Screw shank
A screw shank nail is generally used in hard woods to prevent the wood from splitting while the fastener is being driven. The fastener spins while being driven (like a screw) which creates a tight groove that makes the fastener less likely to back out.
Surface treatment:
Bright FinishBright finish have no coating to protect the steel and are susceptible to corrosion if exposed to high humidity or water. They are not recommended for exterior use or in treated lumber, and only for interior applications where no corrosion protection is needed. Bright finish are often used for interior framing, trim and finish applications.
Electro Galvanized
Electro Galvanized finish have a very thin layer of Zinc that offers some corrosion protection. They are generally used in areas where minimal corrosion protection is needed such as bathrooms, kitchens and other areas that are susceptible to some water or humidity.Areas near the coasts where salt content in rain water is higher should consider a Hot Dip Galvanized or Stainless Steel fastener.
Hot Dip Galvanized
Hot dip galvanized finish are coated with a layer of Zinc to help protect the steel from corroding. Although hot dip galvanized fasteners will corrode over time as the coating wears, they are generally good for the lifetime of the application. Hot dip galvanized fasteners are generally used for outdoor applications where the fastener is exposed to daily weather conditions such as rain and snow.
Apply:
FAQ:
1.Q:Do you have your own production factory?
A:Yes,we not only have our own factory,We also have a cooperative relationship with more than one hundred factories in China
2.Q: Can you send us samples?
A: We are pleased to send you the sample to test the quality and market.
3.Q: About your products, could you do it OEM?
A: Yes, OEM service is available.
4.Q: Do you also provide spare parts of pneumatic tools?
A: Once we confirm the models you'd like to order, we will send you the diagram for checking and also suggest you some easy-broken parts.
5.Q: For the product, could you spray other color of painting?
A: Yes, color can be customized.
6.Q: What's the delivery time?
A: It usually takes about 20-30 working days to produce one order.
7.Q: How is the payment terms?
A: Normally T/T 30% in advance and T/T 70% before shipment.
8.Q: Can I mix different models in one container?
A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.
9.Q: How does your factory do regarding quality control?
A: We always pay great attention to quality control from the very beginning and every product was tested piece by piece before delivery.
10.Q: Do you have quality certification?
A: Yes, we have CE, SGS,ISO, ect.
About us:
Why choose KYA?
1.Short production time:Our company have established the strong partner-ship with over 100 factories and We have our own factory.
2.Reasonable prices and High quality:Quality and prices are our focus because we know what you will care at most.
3.Satisfactory after-sales service: Middle time production report with photos will be sent to you and also reconfirm accomplished date. We will establish close contact with you.Any problem you will get reply at the first time.
4.Free samples: Free samples available at any time.
You can get competitive prices from us because we possess big manufacturing relationship in China.
