Audited Supplier
RoHS, CE
Alumina Ceramic Tube Heater
Ceramic
Pellet Igniter
Tubular
Electric
White
108*Od11.5*ID6.5mm
-50 - 900 ºC
25W/(M.K)
300-500mm
3.7g/cm3
0.3 Kg
1 Year
Mch
1000ºC
150-350W
INNOVACERA
Carton Packing
Fujian, China
Product Description
Alumina Ceramic Pellet Igniter consist of Al2O3 insulation ceramics with an integrated W conductor, and reach a permanent operation temperature of between 900°C and 1100°C.
| Usage | ignition |
| Working Voltage | 230VAC |
| Power | 160W 180W 210W 225W 230W 240W 255W 300W 350W |
| Dimension of product | Existing Sample: 7 8 * Φ 1 0 . 5 * φ 6 . 5 m m, OD10.5*ID6.2*90MM, OD11.5*ID6.5*108MM, |
| Holder Size: D17.5*35MM,O D 2 4 * 4 5MM / O D 2 5 * 3 5MM | |
| Customized sample is acceptable | |
| Lead wire: | 300mm / 400mm / 500mm / 900mm (Customized is accept) |
| Electrode | Welding leads on the electrode |
| Advantages | > Ready to fit solution: High temperature heating element in temperature-resistant ceramic socket |
| > Air can flow through and around inside and outside of heater | |
| > Element temperature: over 1000 °C in permanent and alternating operation, for a short time up to 1200 °C | |
| > Lifetime up to 100,000 heating cycles, depending on operating conditions | |
| > Oxidation and corrosion-resistant | |
| > Ignition through air heating: Due to extremely high heater temperature and ideal geometric conditions, air is heated in a very short time to very high temperatures | |
| - the ideal ignition blower! | |
| > Igniting wood chips, firewood, coal bricks or other biomass (corn, etc.) is possible. |
Pellet Igniter Supplier Advantages:
1.Higher temperature, about twice of traditional metal sheathed heater;
2.Shorter ignition:time, about 60~90 seconds
3.Electrically insulated with no exposed electric contacts
4.Wear and corrosion resistance
5.Long life time
6.Easy to install and replace
2.Shorter ignition:time, about 60~90 seconds
3.Electrically insulated with no exposed electric contacts
4.Wear and corrosion resistance
5.Long life time
6.Easy to install and replace
Ceramic Igniter Concrete applications:
* Hot surface igniters (ignition of gas, oil, biomass, pellets)
* Hot air generation
* Tool heating
* Melting/Welting/Soldering/Hot air soldering
* Heaters for chemical analysis and laboratory equipment (eg: min-furnaces, reactors)
* Customer-specific heating solutions
* Hot air generation
* Tool heating
* Melting/Welting/Soldering/Hot air soldering
* Heaters for chemical analysis and laboratory equipment (eg: min-furnaces, reactors)
* Customer-specific heating solutions
| Alumina Ceramic Heater Configuration and Dimensions | ||||
| Configuration | Dimension (mm) | |||
| Tube/Rod | Diameter/Length/width | Tolerance | Thickness | Tolerance |
| D:2.5~12 L:10~120 | D:Above8+0.3,Below8+0.2 L:Above80+2.0,Below80+1.0 | |||
| Square Plate | L: 10~100 W: 5-50 | Above:70 +2 Below:70+1 | 0.5~2 | ±0.1 |
| Round plate | D:10~70 | Above:30 +2 Below:30+1 | 0.5~2 | ±0.1 |
| ||||
Please note that the above data only can be your reference.Different Structure would difference.(Especialy for the tolerance.
Alumina Ceramic Heater Design Structure
Ceramic Heaters are manufactured by printing resistors on alumina shees,being laminated and sintered into
one pieces.
one pieces.
* Types:
Rectangular alumina ceramic heating element
Round shape alumina ceramic heating element
Rod shape alumina ceramic heating element
Rectangular alumina ceramic heating element
Round shape alumina ceramic heating element
Rod shape alumina ceramic heating element
Tube shape alumina ceramic heating element
Thermal Properties for Alumina Heater | ||
Item | Unit | Value |
Vickers Hardness | Gpa | 11.5 |
Flexural Strength | Mpa | 300 |
Compressive Strength | Mpa | 2000 |
Modulus of Elasticity | Gpa | 300 |
Poisson's Ratio | --- | 0.22-0.23 |
Fracture Toughness | Mpam 1/2 | 3.5-4.0 |
Thermal Conductivity | W/(m·k) | 25 |
Thermal Expansion Coefficient | 10 -6/ | 6.5-7.5 |
Thermal Shock Resistance | △T | 200 |
Maximum Use Temperature | 1600 | |
Dielectric Strength | KV/mm | >12 |
Dielectric Constant | εr | 9-10 |
Dielectric Loss Angle (1MHz) | --- | 0.0002 |
Volume Resistivity | Ω.m | >10 15 |
Specific Heat | J/(kg·k) | 0.78x10 3 |
Not without reason, the high temperature heating elements pellet igniter is the reliable standard ignition system for pellet heating systems in Europe-hundreds of satisfied customers speak for themselves.
1.What's the max using temperature ?
Max 1700degree
2.Which composition suitable for metallized ceramics?
95%, 96% alumina
3.What's the 99 alumina's major applications?
Pump Shaft,Drive Shaft,Sealing Ring
4.Can you do OEM?
We are mostly doing by drawing
5.What's the delivery time?
About 20days
Max 1700degree
2.Which composition suitable for metallized ceramics?
95%, 96% alumina
3.What's the 99 alumina's major applications?
Pump Shaft,Drive Shaft,Sealing Ring
4.Can you do OEM?
We are mostly doing by drawing
5.What's the delivery time?
About 20days
SEND ME
If you are interested in our products, please click here to send me an inquiry, and I will reply you within 8 hours
