Audited Supplier
24 inch-3R/VS
Disc Grinder
Pneumatic
Turning Tool
Mechanical Seal Faces
Brushing Wheels
Cast Iron Plate
Three-roll
610mm
With Variable Speed
3 H.P Motor by Baldor
1 Year Warranty on All Parts
686 Kgs Approx
L 111.8*W 111.8*H 106.7 Cms Approx
TRUELAP
Trisun Standard or Customised
polishing rings max od at 240mm
Made in China
8460902000
Product Description
We supply polishing machines in 15 inch, 18 inch, 24 inch and 36 inch.
15-18 inch is suitable for repair the seal face and mainly the seal or pump repair company purchase .
And
24- 26 inch is better from seal manufacturer .
24 inch polishing machine is automatic liquid spray, and there is a time and speed control system that can adjust the polishing speed by lapping different materials.
If polish the SIC and TC, you can adjust the speed quickly. If polish CE or CA, you can slow down the speed.
Brief description:
Standard Features:
- 1 Hp, 3 Ph, 415V, 50 Hz, Bonfiglioli geared motor with an output of max 70 rpm, lubricated for life
- 1 Hp, Telemecanique Variable Frequency drive to give stepless speed up to 70 rpm. ( Now as a standard feature)
- Slurry tray, with wiper, outlet pipe into the slurry tank directly kept inside the machine
- Slurry pump, slurry divider, slurry flow regulator and outlet pipe on to the lap plate in case of abrasive lapping.
- Compact Electrical and power panel with all switches, digital process timer, VFD unit, etc
-Complete powder coated and ready for startup,
Standard Toolings:
- 1 no of Graded cast iron lap plate of diameter 610 mm approx
- 3 nos of geared conditioning rings with id 240 mm,
- 3 nos of dead weights
- 3 nos of felt pads
- conditioning rings of height 70 mm approx with combo outer design, half plain and half geared for reversal
- 3 nos of nylon side guide rollers
- 1 no of Central Roller drum with gear for ring reversal
We also supply lapping plates for lapping different material:
Cast Iron plate
Ceramic plate especially suitable for lapping Carbon and Ceramic
Copper plate in Sprial line
If polish the SIC and TC, you can adjust the speed quickly. If polish CE or CA, you can slow down the speed.
Brief description:
- Only manufacturer to design and provide a rigid Spindle Housing, hardened spindle with heavy duty bearings lubricated for life.
- The geared motor is attached to the bottom of the Spindle housing. The spindle shaft enters the gearbox and is firmly attached and secure.
- The entire axial load from the top including the weight of lap plate, rings, dead weights/pneumatic pressure and all are taken up by the center plate and the bearings directly.
- This design directly increases the life of the gearbox and ensure trouble free running for life. The gearbox is lubricated for life.
Standard Features:
- 1 Hp, 3 Ph, 415V, 50 Hz, Bonfiglioli geared motor with an output of max 70 rpm, lubricated for life
- 1 Hp, Telemecanique Variable Frequency drive to give stepless speed up to 70 rpm. ( Now as a standard feature)
- Slurry tray, with wiper, outlet pipe into the slurry tank directly kept inside the machine
- Slurry pump, slurry divider, slurry flow regulator and outlet pipe on to the lap plate in case of abrasive lapping.
- Compact Electrical and power panel with all switches, digital process timer, VFD unit, etc
-Complete powder coated and ready for startup,
Standard Toolings:
- 1 no of Graded cast iron lap plate of diameter 610 mm approx
- 3 nos of geared conditioning rings with id 240 mm,
- 3 nos of dead weights
- 3 nos of felt pads
- conditioning rings of height 70 mm approx with combo outer design, half plain and half geared for reversal
- 3 nos of nylon side guide rollers
- 1 no of Central Roller drum with gear for ring reversal
We also supply lapping plates for lapping different material:
Cast Iron plate
Ceramic plate especially suitable for lapping Carbon and Ceramic
Copper plate in Sprial line
