Audited Supplier
FRP Tank
1. Pressure tanks are made of high performance composite material with FRP filament winding. All the pressure tanks are 100% corrosion resistant.
2. All thread inlet made from 30% glass filled PP provides higher strength, temperature, and pressure limits verus glass filled PE.
3. Liner wall thickness available from 0.15: (3.0mm) to 0.3"(7.6mm) corresponding to the tank diameter.
4. Full line of pressure tanks from 6" to 63" in diameter and from 10" to 86" in height.
5. Operating Pressure: 150psi(10.5bar)
6. Operating temperature: 120F(49° C)
Product Description
High Performance No pollution Natural FRP Pressure Tanks for water softner
| Tank Size | Top Opening | Bottom Opening | Capacity (L) | Tank Size | Top Opening | Bottom Opening | Capacity (L) | ||
| Inch | MM | Inch | MM | ||||||
| 8*17 | 200*450 | 2.5 | / | 11.5 | 6*10 | 156*259 | 2.5 | / | 8.5 |
| 8*35 | 200*890 | 2.5 | / | 24.5 | 6*35 | 156*894 | 2.5 | / | 9.5 |
| 8*44 | 200*1100 | 2.5 | / | 32.9 | 7*30 | 180*762 | 2.5 | / | 10.5 |
| 9*35 | 255*890 | 2.5 | / | 31.5 | 30*72 | 750*1850 | 4 | 4 | 650 |
| 10*17 | 250*450 | 2.5 | / | 18 | 30*77 | 750*1950 | 4 | 4 | 690 |
| 10*35 | 250*890 | 2.5 | / | 38.5 | 30*87 | 750*2200 | 4 | 4 | 750 |
| 10*52 | 250*1370 | 2.5 | / | 62 | 36*65 | 906*1900 | 4 | 4 | 780 |
| 12*52 | 300*1370 | 2.5 | / | 83 | 36*72 | 900*1850 | 4 | 4 | 950 |
| 12*65 | 300*1650 | 2.5 | / | 112 | 36*87 | 900*2200 | 4 | 4 | 1060 |
| 13*54 | 330*1370 | 2.5 | / | 104 | 36*94 | 900*2400 | 4 | 4 | 1100 |
| 14*65 | 350*1650 | 2.5 | / | 154 | 40*65 | 985*1940 | 4 | 4 | 1150 |
| 16*65 | 420*1668 | 2.5 | / | 185 | 40*79 | 985*2000 | 4 | 4 | 1300 |
| 16*65 | 420*1668 | 4 | / | 185 | 40*79 | 1000*2400 | 6 | 6 | 1350 |
| 18*65 | 463*1655 | 4 | / | 240 | 48*72 | 1200*2200 | 6FL | 6FL | 1750 |
| 18*65 | 463*1873 | 4 | 4 | 290 | 60*79 | 1200*2400 | 6FL | 6FL | 2000 |
| 20*69 | 510*1770 | 4 | 4 | 410 | 72*79 | 1500*2400 | 6FL | 6FL | 3500 |
| 24*72 | 612*2080 | 4 | 4 | 420 | |||||
Features
* Frotec frp tanks are made of high quality composite materials HDPE liner, with blow molding technique, it provides continuous seamless inner liner shell.
*Epoxy resin system and FRP filament winding outer shell, which reinforces the liner and provides strong strength for
high pressure application.
