Audited Supplier
Valve Electric Actuator
Compact design and light weight, small electrical actuator with fail-safe function (NC)Perfomance Parameter | |||
| Model | 50N | ||
| Power supply(v) | DC24V | AC110V | AC220V |
| Output terque | 50NM | 50NM | 50NM |
| Motion times(s) | 20s | 20s | 20s |
| Scope of rotary angle(°) | 0-360° | 0-360° | 0-360° |
| Motor power(w) | 13w | 10w | 10w |
| Rated curent(A) | 1.28A | 0.24A | 0.18A |
| Machine weight(kg) | 2.2kg | 2.2kg | 2.2kg |
| Insulation Resistance(MQ) | DC24V:100MQ/250VDC AC110V/220V 380V:100MΩ/500VDC | ||
| Voltage Resistance Rating | DC24V:500VAC;AC110V/220V:1500VAC;AC380V:1800VAC . (11Minute) | ||
| Protection Level | lp66 | ||
| Installation Position | 360°Rotary degree:360° | ||
| Electriad connection | G1/2,Each oneG1/2water-proof cable connectors,Electic power lines,Signal lines | ||
| Environment temperature | -30°~+60° | ||
| Control aircuit options | :A:B:CD:() Standard type Limit postion Swtch.Atype.with mid-position Switch.B type with potentiameter.C type.with potentiometer and mid-poston switch. D type:with servo contoler(Regulatory) | ||
| Optional function | Over torgue protedtors Dehumidify heater | ||
Perfomance Parameter | ||||
| Model | 100N | |||
| Power supply (v) | DC24V | AC110V | AC220V | AC380V |
| Output terque | 100NM | 100NM | 100NM | 100NM |
| Motion times(s) | 30s/60s | 30s/60s | 30s/60s | 30s/60s |
| Scope of rotary angle() | 0-360° | 0-360° | 0-360° | 0-360° |
| Motor power(w) | 25w | 25w | 25w | 25w |
| Rated cument(A) | 2.03A | 0.57A | 0.35A | 0.10A |
| Machine weight(kg) | 4.0kg | 4.0kg | 4.0kg | 4.0kg |
| Insulation Resistance(MQ) | DC24V:100MQ/250VDC AC110V/220V 380V:100MQ/500VDC | |||
| Voltage Resistance Rating | DC24V:500VAC;AC110V/220V:1500VAC;AC380V:1800VAC.(11Minute) | |||
| Protection Level | lp66 | |||
| Installation Position | 360°Rotary degree:360° | |||
| Electriad connection | G1/2,,Each oneG1/2 water-proof cable connectors,Electric power lines,Signal lines | |||
| Environment temperature | 30°~+60° | |||
| Control circuit options | Standard type:Umit postian SwtchAtype:wtth md-position Swtch.B type:with potentometer.C type.with potentometer and mid-positon switch. D type:wth servo controler(Regulatory) | |||
| Optional function | Over torgue protectors Dehumidify heater | |||
Perfomance Parameter | ||||
| Mode | 200N | 400N | 600N | 800N |
| Outout terque | 20kgfm | 40kgf-m | 60kgf-m | 80kgfm |
| Motion times(s) | 15s/30s/45s | 30s/45s | 30s/45s | 60s |
| Scope of rotary angle(°) | 0-90° | 0-90° | 0-90° | 0-90° |
| Motor power(w | 40w/30w | 90w/60w | 100w | 100w |
| Rated cument(A | 0.37A/0.25A | 0.69A/0.51A | 0.85A | 0.85A |
| Machine weight(kg) | 11kg | 11KG | 11.3kg | 11.3kg |
| Power supply (V | DC24V AC110V AC220V±10%50HZ/60HZ AC380V | |||
| Motor protectior | Built-in thermal protection | |||
| Insulation Resistance(MQ | 100MQ/500VDC | |||
| Voltage Resistance Rating | 1500VAC(11Minute) | |||
| Manual operation | It comes with stainless steel handles | |||
| Protection Level | ||||
| Installation Position | 360°Rotary degree:360 | |||
| Electriad connection | G1/2,,Each oneG1/2water-proof cable cnnectors,Elecric power lines,Signal ines | |||
| Limit element | Limit switch,Mechanical stroke block | |||
| Environment temperature | -20°~+60 | |||
| Control circuit options | Standard type:Limit posihon SwtchAtype wth mid-positon Swtch.B type wth potentiameter.C type.with potentiameter and mid-positon switch D type:with servo contoler(Regulatory) | |||
1.What is the most common type of actuation for 3/4" valves?
Electric and pneumatic actuators are commonly used, depending on the application requirements and operational environment.
2.How do I choose the right actuator for my 3/4" valve?
Consider factors such as the type of fluid, required response time, frequency of operation, and available energy sources.
3.Can I retrofit a manual valve to an automated system?
Yes, many manual valves can be retrofitted with electric or pneumatic actuators, but compatibility should be verified.
4.What are the maintenance requirements for actuated valves?
Regular inspections of the actuator, valve seals, and connections are necessary to ensure optimal performance and prevent leaks.
5.Are there safety concerns with using actuated valves?
Yes, it's important to implement safety measures such as fail-safe mechanisms and regular system checks to ensure safe operation.
