Audited Supplier
2708614
Fiber Transceiver
ODF
CE
New
12 V DC ... 57 V DC
24 V DC 48 V DC
20 Ma (24 V DC)
170 Ma
12 V DC ... 48 V DC (Depending on Input Voltage)
100 Ma
in-Line Spring Connection
0.20 mm² ... 2.50 mm²
0.20 mm² ... 2.50 mm²
Flexible [AWG] 24 ... 12
AWG 24 ... 12
10.00 mm
Ethernet
Fiber Optic
-8 dBm (9/125 μm, Single Mode Fiber)
Phoenix
Carton
50 cm x 50 cm x 50 cm
Germany
Product Description
MC 1000T-SM40 WDM B Media Converter
This media converter connects a 10/100 Mbps twisted-pair RJ45 port with a 100 Mbps WDM single-mode fiber port. It comes equipped with an SC simplex connector and supports a wide operating temperature range, ensuring reliable performance in various environments.
More Phoenix brand products
This media converter connects a 10/100 Mbps twisted-pair RJ45 port with a 100 Mbps WDM single-mode fiber port. It comes equipped with an SC simplex connector and supports a wide operating temperature range, ensuring reliable performance in various environments.
| Category | Details |
|---|---|
| Application | For industrial use only |
| EMC Information | EMC: Class A product, refer to the manufacturer's declaration in the download section |
| Product Type | Media Converter |
| MTTF | 69.1 years (MIL-HDBK-217F standard, temperature 25°C, 100% duty cycle) |
| 508.3 years | |
| 702.5 years (Telcordia standard, temperature 25°C, 100% duty cycle, 24/7 operation) | |
| Power Supply | Voltage range: 12 V DC ... 57 V DC |
| Rated supply voltage: 24 V DC, 48 V DC | |
| Typical Current Consumption | 20 mA (24 V DC) |
| Maximum Current Consumption | 170 mA |
| Signal | Voltage Output Signal: 12 V DC ... 48 V DC (depends on input voltage) |
| Current Output Signal: 100 mA | |
| Power Supply Connection | Direct plug-in spring connection |
| Flexible Wire Cross-section | 0.20 mm² ... 2.50 mm² |
| Hard Wire Cross-section | 0.20 mm² ... 2.50 mm² |
| Wire Cross-section (Flexible) | AWG 24 ... 12 |
| Wire Cross-section (Hard) | AWG 24 ... 12 |
| Stripping Length | 10.00 mm |
| Signal (Ethernet) | Data: Fiber Optic |
| Min. Transmission Power | -8 dBm (9/125 μm, single-mode fiber) |
| Max. Transmission Power | 0 dBm (9/125 μm, single-mode fiber) |
| Connection Type | SC simplex |
| Wavelength | 1550 nm (transmit) |
| 1310 nm (receive) | |
| Min. Reception Sensitivity | -34 dBm (9/125 μm, single-mode fiber) |
| Max. Reception Sensitivity | 0 dBm (9/125 μm, single-mode fiber) |
| Transmission Medium | Single-mode glass fiber |
| Ethernet Interface | 10/100Base-T(X), compliant with IEEE 802.3 standard |
| Transmission Speed | 10/100 MBit/s |
| Connection Type (Ethernet) | RJ45 socket, shielded |
| Number of Channels | 1 |
| Transmission Length | 100 m (shielded twisted pair) |
| Transmission Medium (Ethernet) | Copper cable |
| Signal LED | LNK/ACT, SPD, Err, US, US2 |
| Auto Negotiation Mode | Automatic |
| Link Fault Alarm Function | Yes |
| MDI-/MDI-X Conversion | Automatic-MDI(X) |
| Dimensions | Width: 22.5 mm |
| Height: 125 mm | |
| Depth: 90 mm | |
| Housing Material | Fiber-reinforced polycarbonate, Aluminum/steel DC01 |
| Fiber Optic | Fiber Type: 9/125 µm glass fiber |
| Vibration Standard | Complies with EN 60068-2-6/IEC 60068-2-6 (Vibration standard): 5g, 150 Hz, Standard 3 |
| Shock Resistance Standard | Complies with EN 60068-2-27/IEC 60068-2-27 (Shock standard): 30g, 11 ms half-sine shock pulse |
| Environmental Conditions | Protection Rating: IP30 |
| Operating Temperature: -40°C ... 75°C | |
| Storage/Transport Temperature: -40°C ... 85°C | |
| Altitude: ≤ 2000 m (compliant with UL standards) | |
| Operating Humidity: 10% ... 95% (non-condensing) | |
| Shock: 300 m/s², 11 ms (IEC 60068-2) | |
| Compliance/Certifications | Compliance: CE Mark |
| UL (USA/Canada): UL 61010-1, UL 61010-2-201, Class I, Div. 2, Groups A, B, C, D, T4 | |
| UL (Zone 2): Class I, Zone 2, Group IIC, T4 | |
| Electromagnetic Compatibility | Complies with 2014/30/EU EMC Directive |
| Electrostatic Discharge: EN 61000-4-2, Standard B | |
| High-Frequency Electromagnetic Fields: EN 61000-4-3, Standard A | |
| Fast Transients (Pulse): EN 61000-4-4, Standard A | |
| Surge Current Load (Surge): EN 61000-4-5, Standard B | |
| Conducted Interference: EN 61000-4-6, Standard A | |
| Radiated Interference: EN 55032 | |
| Installation Type | DIN rail: 35 mm |
| Installation Location | Mounting on a horizontal DIN rail NS 35 according to EN 60715 standard |
More Phoenix brand products
