Audited Supplier
FV12.5B+C/2+NPE-1000PV
Power Source Arrester
Zinc Oxide Arrester
Parallel Arrester
AC/DC System
Small
Low Voltage
Ceramic
ROHS, ISO9001, CE
FATECH
Type 1+2
Gray
(+/-)-PE , (-/+)-PE
Surge Protection for Power System in AC Side
2 poles
Welcome
20 kA
UL94V-0
Class II
-40°C ~+80°C
275 Vac
FATECH, OEM is welcome
1 PC Surge Arrester in One Inner Box
CE
China
85363000
Product Description
| Model. No. | FV12.5B+C/2+NPE-1000PV |
| SPD protection conforms to EN50539-11/IEC61643-31 | Type 1+2 |
| SPD installation type conforms to EN50539-11/IEC61643-31 | Class I+II |
| Protection level conforms to DIN VDE0675-6 | B+C |
| Type of Network | Photovoltaic systems DC side |
| Protection mode | (+/-)-PE , (-/+)-PE |
| Nominal Voltage UN | 1000 Vdc |
| Maximum continuous operating voltage for PV application UCPV | 1000 Vdc(+/-), 725V(+/PE, -/PE) |
| Continuous operating current ICPV | <20 µA |
| Residual current IPE | ≤20 µA dc ≤500 µA ac |
| Standby power consumption PC | ≤25 mVA |
| Nominal discharge current (8/20μs) In | 20 kA |
| Impuse discharge current (10/350μs) Iimp | 6.25 kA |
| Total Impuse discharge current (10/350μs) Itotal | 12.5 kA |
| Voltage protection level Up | ≤4.75 kV(+/-) ≤3.5 kV(+/PE, -/PE) |
| Isolation resistance Risol | >1000 MΩ |
| Response time tA | ≤25 ns(+/-) ≤100 ns (+/PE, -/PE) |
| Remote control contact | NO |
| Disconnection indicator | Mechanical indicator (Green: OK, Red: Replace) |
| Minimum area of connecting cable | 6 mm2 |
| Maximum area of connecting cable | 35 mm2 |
| Installation location | Inside |
| Mounting type | 35mm DIN rail acc. to EN 60715 |
| Color | Gray |
| Degree of protection | IP20 |
| Housing material | UL94V-0 |
| Ambient temperature | -40°C ~+80°C |
| Altitude | ≤2000 m (amsl (above mean sea level)) |
| Permissible humidity | 30%~90% |
