Audited Supplier
NS-SECR-370
TV Broadcasting
Satellite Signal Receiving
ISO, RoHS
New
3.7m
Prime Focus
Manual/Motorized
C/Ku Band
Linear/Circular
Available
Newstar
Exxport Wooden Case Reinforced with Steel Frame
ISO9001
Xi'an, China
8517707090
Product Description
 | | | |
High gain, low sidelobe, high polarization identification rate;
High precision reflector accuracy;
Prime focus and ring focus are optional;
C Band and Ku Band optional;
Modern design,convenient and fast installation & adjustment
Steel parts all through hot dip galvanized processing,with strong anti-corrosion stability;
Stainless steel standard component.Steel parts all through hot dip galvanized processing,with strong anti-corrosion stability;
Standard configuration
Main reflector, feed and feed support, hub, back support frame, kingpost, foundation template and standard component.
Optional
LNB, controller, drive unit, limit switch, motorized polarization, moving foundation, lightning rod and wire.
| Model | NS-SECR-370 | |
Operating Frequency, GHz | C band | |
| Standard: 3.625~4.2 Extended: 3.4~4.2 | ||
| Antenna gain dBi | 41.95dB(F=3.8GHz) | |
| Polarization | Linear | Circular |
| Cross Pol differentiate,dB | ≥35 | |
| -3dB Beamwidth, Mid-Band | 1.334° | |
| Typical G/T at 20°EL | 24.05dB/K(3.8GHz, 30K LNA) | |
| Feed insertion loss | 0.2dB | |
| Axial ratio (dB) | 0.75dB | |
| VSWR | 1.25 | |
| Antenna Noise Temperature | 35°K@10° | |
| Interface | WR229G | |
| General Sidelobe Envelope,dBi | 52-10logθ(D/∧)-25logθ | |
| Mechanical specifications | |
| Antenna diameter | 3.7m |
| Antenna type | Prime focus |
| Material | 12 pieces aluminum panels that thickness ≥1.5mm |
| Antenna Kingpost | El over Az, single pole |
| RMS | ≤ 0.5 mm |
| Antenna travel range AZ EL Pol | 360°( manual ); ±85°(Motorized) 0°~90° ±90° |
| Antenna drive mode | Manual or Motorized |
Panel treatment | Compressed by 1.5mm 3003-O aluminum, degrease and based with primer paint and finished with anti-rust white paint |
Steel parts | Sand blasting and hot dip galvanized processing firstly, then primer paint and final white paint processing. |
Working wind speed | 72kmph work wind speed(Hold the precision ) 97kmph work wind speed(Lower the precision ) 200kmph Survival Winds(Upturned lock) |
| Working temperature | -45ºC~60ºC |
| Humidity | 0~100% |
| Seismic capacity | 0.3G`s horizontal, 0.15G`s vertical |
| Solar radiation | 360BTU/h/ft² |
| Ice load | 3cm |
