Audited Supplier
1. the whole structure by FEM finite element analysis, can ensure better stiffness and stability; The casting is made of resin sand casting and aged treatment to eliminate internal stress and ensure good accuracy retention.
2. Bearing seat, screw nut seat and casting integrated structure design.
3. The use of ball nut screw pair and rolling guide pair produced in Taiwan can extend the service life of the machine tool.
4. the three-axis drive adopts imported FANUC AC servo motor, and directly drives the ball screw through the coupling, which can ensure the fast response and smooth cutting of the machine tool during processing.
5. the main shaft bearing selection of Japan NSK, spindle taper handle BT30.
6. the use of Japan FANUC oi-MF CNC system.
7. the lubrication system of the machine tool adopts the centralized lubrication pump to supply oil, and carries out regular and quantitative lubrication for each lubrication point (such as guide rail, ball screw); In addition, the lubrication pump station also has the function of pressure and level monitoring and alarm, which is controlled by the electrical system to achieve automatic centralized lubrication.
8. The pneumatic system of the machine tool is composed of the air source processing element, the control valve and the executive element, and the pressure detection switch is provided, and the pressure of the machine tool system is monitored by the CNC system.
9. machine tool safety, protection device
(1) The X, Y, Z three-axis transmission system of the machine tool is equipped with a number of safety control devices such as electrical limit and mechanical limit to keep the machine tool working in a safe and reliable state and ensure the personal safety of the operator.
(2) Headstock, drag plate and bed guide rail protection are fully enclosed protective cover.
(3) The overall protection of the machine tool is made of high-quality sheet metal parts.
| Item | Specification | Unit | TC40A | TC40B |
| Worktable | Worktable dimension | mm | 650×400 | 650×400 |
| Max. load | kg | 300 | 300 | |
| T-solt | mm | 3-18×125 | 3-18×125 | |
| Travel | X axis | mm | 500 | 500 |
| Y axis | mm | 400 | 400 | |
| Z axis | mm | 330 | 330 | |
| Distance from worktable to spindle nose | mm | 150~480 | 150~480 | |
| Distance from spindle center to guideway guard of Z axis | mm | 435 | 435 | |
| Min. distance from spindle center to the inside of front guard | mm | 650 | 650 | |
| Spindle | Spindle speed | rpm | 50~20000 | 50~3000 (spindle motor) |
| Spindle torque | N.m | 7 | 6 | |
| Spindle motor | kw | 2.2/3.7(a2i) | 3.7 | |
| Taper hole | MAS BT30 | HSK-E40 | ||
| Feed rate | X/Y/Z axis rapid feed rate | m/min | 48 | 48 |
| X/Y/Z axis feed rate | m/min | 20 | 20 | |
| X/Y/Z feed axis motor | kw | X,Y: a8is; Z: a12is | X,Y: 11Nm; Z: 16Nm | |
| Tool magazine | Shank type | MAS BT30 | HSK-40E | |
| Pull stud type | MAS P30T-I | |||
| Magazine capacity | tools | 21 | 20 | |
| Max. tool diameter(adjacent pots full) | mm | Φ50 | Φ50 | |
| Max. tool diametet(empty) | mm | Φ90 | Φ90 | |
| Max. length of tool | mm | 110 | 110 | |
| Max. weight of tool | kg | 3kg | 3kg | |
| Tool change time | ″ | 1.9 | 2.0 | |
| Control system | Standard/ optional | FANUC-0i-MF SIEMENS 828d | ||
| Accuracy | X/Y/Z axis positioning accuracy | mm | X/Y/Z axis: 0.010 | X/Y/Z axis: 0.010 |
| X/Y/Z axis repeatability | mm | X/Y/Z axis: 0.006 | X/Y/Z axis: 0.006 | |
| Overall dimension | Floor occupation(including chip conveyor) | mm | 1650×2350×2500 | 1650×2550×2500 |
| Machine weight | Net weight | T | 2.8 | |
| Power supply | Pneumatic pressure | Mpa | 0.5~0.8 | |
| Pneumatic air consumption | L/min | 280 | ||
| Power | 3 phase AC380V, 50/60Hz, 10kVA | |||
SHINRI CNC Machinery Group is consisted of Jiangsu Shinri Heavy lndustry Science &Technology Co., Ltd, Jiangsu Shinri Gear Systems Co., Ltd Ningxia Shinri Changcheng Machinery Co., Ltd, Ningxia Shinri Changcheng Casting Company Co., Ltd. Lt is subordinate to the New United Group. Shinri products covered three time-honored brands, respectively Shinri, Changcheng and Duoleng and 12 different products series. So far Shinri becomes one of the biggest machine tool manufacturers covering nearly alltypes of machines in China.
By embracing new, high and outstanding technology, Shinri opens his hands to escalate his customers from their traditional applications and gives optimized solutions. The two R&D centers and manufactory bases, in Changzhou and Yinchuan, have totalarea of premises of 700 thousands m and 300 thousands m modernized plants. We introduced a good number of high precision mother machines from world first class makers and the yearly machine production reaches to 3500 pieces or more. In Yinchuan city, by invested 600 mllion RMB, the first phase of construction of foundry plant has established with yearly capacity 40 thousand tons With strong financial, intelligent and technical supports, the company is gigantic in R&D and manufactory.
Its products list covers VMC, HMC, CNC lathe, gantry boring milling/machining center/5 faces/5-axis synchronous, floor type boring milling/machining center, end facing & centering machine, drilling machine, FMC, FMS, Railway gear box, Wind power gear box and industrial gear box etc. The products are broadly applicable to aerospace, automobile, shipbuilding, electronic appliance, new energies sources, railway traffic, engineering mechanic, petro chemistry, die tooling and vocational education...etc.
As a national enterprise endowed with the mission of rejuvenating Chinese traditional industry, Shinri will follow the concept ofputing people first, making innovations & building a future of excellence. Work under the guiding principle of providing the highquality products & best service for customers in order to become the most competifive CNC machine tool manufacturer & bestsolution provider at home & abroad.
