Audited Supplier
NOTE: Please indicate the length of the hose(90cm, 120cm, 150cm or 180cm)
Please indicate the size of the hose connector(1/4SAE, 1/2ACME or others)
1/4'' Flexible Hoses | 3/8'' Flexible Hoses | 1/2'' and 5/8'' Flexible Hoses | |
Easily connects to 1/4'' male flare access fittings on system | Evacuates and charges 4 times faster than 1/4'' hose | 1 Evacuates and charges 8 times faster than 1/4'' hose 2 Allows you to pull a deeper vacuum 3 More efficient job of removing moisture and contaminants from the system | |
1/4'' Standard Charging Hose | 1/4'' Premium Charging Hose | 3/8'' Charging Hose | 1/2'' and 5/8'' Charging Hose |
1 All-weather flexible 2 Dependable 3 Adjust-a-valve opener Valve core depressor allows you to easily open all troublesome, out of tolerance Schrader valves | 1 Adjust-a-valve opener Valve core depressor allows you to easily open all troublesome, out of tolerance Schrader valves 2 Double barrier protection Moisture barrier provides improved resistance to moisture migration which contaminates expensive refrigerants 3 Rubber layer for permeation, braid for strength, and outer cover for protection | 1 Double barrier protection Moisture barrier provides improved resistance to moisture migration which contaminates expensive refrigerants 2 Higher working pressure | 1 Double barrier protection Moisture barrier provides improved resistance to moisture migration which contaminates expensive refrigerants 2 Larger ID reduces vacuum time substantially cover 1/4'' or 3/8'' hose, allows techs to pull a faster vacuum 3 Faster refrigerant transfer and faster charging on large systems 4 Wide selection of fittings are available |
Temperature: -20F to 180F(-28.8C to 82.2C) | Temperature: -20F to 200F(-28.8C to 93.3C) | ||
Burst: 2500psi (172bar) | Burst: 4000psi (276bar) | Burst: 3000psi (207bar) | |
Working: 500psi (34 bar) | Working: 800psi (55bar) | Working: 600psi (41bar) | |
Safety Factor: 5 to 1 | |||
Available Length: 12 inches to 100 feet (12'', 24'', 36'', 48'', 60'', 72'', 96'', 10', 12', 25', 50', 75', 100') | |||
Remark 1 For standard charging hose, W.P./B.P.: 600psi-3000psi is available 2 For 3/8'', 1/2'', 5/8'' charging hose, W.P./B.P.: 800psi-4000psi or W.P./B.P.: 500psi-3000psi are available 3 For vacuum hose, 36'' hose will pull to 25 Microns and lower, hoses longer than 8' not recommended for evacuation | |||
