Audited Supplier
- Rugged welded design does not fall apart during construction.
- Available from one to six gang configurations in both 2-1/2" and 3-1/2" depths.
- Rectangular shape fits square cuts in block.
- Large volume design allows for additional work room inside the box.
- Standard 1/2" and 3/4" concentric knockouts.
- Device ears inside the box prevent mortar from getting in the device holes.
- Steel voltage partition #971 fits all 2-1/2" or 3-1/2" depths.
- Standard wall plates can be used.
- Device ears are formed inside the box
- Rectangular shape neatly fits square cuts in concrete block, 3-3/4 in. x 5-19/32 in
- 47.8 cu. in. capacity
- UL listed
| Actual Depth | 3.578 in |
| Cubic Capacity | 89.8 cu.in |
| Depth | 3.5 in |
| Raised Ground | No |
1gang Masonry Box, NonGangable, 3-1/2 in. Deep, Conduit KO's, Welded
- Integral brackets securely hold box to concrete block from front and back in masonry block walls, even in irregular openings
- TKO® Knockouts allow for design and installation flexibility
- Suppied with ten 1/2-3/4 in.TKO® knockouts
- Quick and accurate positioning
- Break off front tabs
- Non-gangable
- 22.5 cu. in. capacity
- Acceptable for use in 2-hour fire rated walls
- Integral brackets securely hold box to concrete block from front and back in masonry block walls, even in irregular openings
- Supplied with twenty-four 1/2-3/4 in. concentric knockouts
- Quick and accurate positioning
- Break off front tabs
- Non-gangable
- 89.8 cu. in. capacity
- Acceptable for use in 2-hour fire rated walls
Descriptions of electrical outlet box
1) Using for EMT conduit cover for octangular / square / rectangle box.
2) All using automatic punching machine & molds, precise for each products.
3) K.O.S can make mixed size or only one size.
4) C/O cover and screws. Can make the bottom side hole as the terminal hole
5) Come without terminal brass part unless ordered, can be make one or two adjustable lug, thickness from 0.60mm to 1.60mm.
1.Q: What kind of material you can offer?
A: We can offer you GALVANIZED STEEL, STAINLESS STEEL, ALUMINUM, Zinc, etc.
2.Q: What kind of standard you are following?
A: We are producing following by UL standard, most popular around the world,
of course, we also have customized products.You can provide your specification.
3.Q: Could you change the size for the customer?
A: Yes, we do for some customer special size.
4.Q: How many days can you deliver the order?
A: Normally after deposit or L/C 20-30 days, actually it depends on your request.
5.Q: What about the payment?
A: We can accept L/C, T/T, D/P and trusted payment methods.
6.Q: Do you provide samples?
A: yes, we can offer the standard product sample freely, but we do not bear the freight. Sample preparation will take some time, and if you asked to use DHL, FedEx, etc. to send samples, you can inform us in advance to prepare.
7.Q: Are you a trading company or manufacturing company?
A: Both we are, we have ten years experiences in foreign trading business and more than five years in electrical conduit industry. Of course, we are always expanding our business.
8.Q: How can you guarantee your products?
A: we guarantee your 100% satisfaction on all our products. Please feel free to feedback us immediately if you are not satisfied with our quality or service. If the product does not meet the contract requirements, we will send you a free replacement or give you compensation in the next order. For foreign orders, we ensure every order carefully. In some special cases, we will give some discounts as a solution.
9.Q: How about your capability in manufacturing?
Based on reasonable price, good quality, great after service, and Workers' Passion and Effort, we are capable of manufacturing 6000 tons of steel conduit per year and 4000 tons of die casting and steel accessories anually.
Choosing us is the best choice.
