Audited Supplier
AHS-3000
2880wh
70*66*28cm
45kg
3 Years
LiFePO4 Battery/Lithium Battery
48V
4000times
ANE
1PCS/Plywood Box
3kW
China
85076000
Product Description
Household portable 3KW energy storage power station
1. Application environment and value
The system application scenario of the product is shown in the following figure. A complete system consists of the following parts:
1. Photovoltaic modules: convert the light energy into direct current, charge the battery through the reverse control all-in-one machine, or directly reverse into an AC drive load.
2. Mains electricity or generator: connected to the AC input to charge the battery while supplying power to the load. If the power supply or generator is not connected, the system can also operate properly, and the load is powered by the battery and the solar module.
3. Battery: used to ensure the normal power supply of the system load when the solar energy is insufficient and the mains power is not connected.
4. Home load: can connect a variety of home and office loads, including refrigerators, lamps, TV, fans and air conditioning.
5. Inverse control all-in-one machine: the energy conversion equipment of the whole system.
2. Functional characteristics
1. Fully digital voltage and current double closed-loop control, advanced sinusoidal pulse width modulation technology, output pure sinusoidal wave.
2. Two output modes: mains power bypass and inverter output, uninterrupted function.
3. Four charging modes are available: hybrid charging with only solar energy, mains power priority, solar energy priority and mains power solar energy.
4. Advanced maximum power point tracking technology, with an efficiency of 99.9%.
5. Have an LCD screen and 4 indicators design to dynamically display the system data and running status.
6. With the lamp self-lock type switch control AC output.
7. The power-saving mode can be used to reduce the power loss.
8. Intelligent variable speed fan efficient heat dissipation, prolong the system life.
9. Lithium battery is activated by photovoltaic solar energy or mains power, and charge the lithium battery in two ways.
10. 360° comprehensive protection, a number of protection functions, including short circuit protection, over voltage, under voltage protection, overload protection, reverse connection protection, etc
11. Lithium iron phosphate battery, high energy density and power density, good safety performance.
3. Product features
3.1. Appearance Dimension Drawing (670 * 620 * 260mm)
3.2. Interface Description
4. Electrical performance and parameters
1. Application environment and value
The system application scenario of the product is shown in the following figure. A complete system consists of the following parts:
1. Photovoltaic modules: convert the light energy into direct current, charge the battery through the reverse control all-in-one machine, or directly reverse into an AC drive load.
2. Mains electricity or generator: connected to the AC input to charge the battery while supplying power to the load. If the power supply or generator is not connected, the system can also operate properly, and the load is powered by the battery and the solar module.
3. Battery: used to ensure the normal power supply of the system load when the solar energy is insufficient and the mains power is not connected.
4. Home load: can connect a variety of home and office loads, including refrigerators, lamps, TV, fans and air conditioning.
5. Inverse control all-in-one machine: the energy conversion equipment of the whole system.
2. Functional characteristics
1. Fully digital voltage and current double closed-loop control, advanced sinusoidal pulse width modulation technology, output pure sinusoidal wave.
2. Two output modes: mains power bypass and inverter output, uninterrupted function.
3. Four charging modes are available: hybrid charging with only solar energy, mains power priority, solar energy priority and mains power solar energy.
4. Advanced maximum power point tracking technology, with an efficiency of 99.9%.
5. Have an LCD screen and 4 indicators design to dynamically display the system data and running status.
6. With the lamp self-lock type switch control AC output.
7. The power-saving mode can be used to reduce the power loss.
8. Intelligent variable speed fan efficient heat dissipation, prolong the system life.
9. Lithium battery is activated by photovoltaic solar energy or mains power, and charge the lithium battery in two ways.
10. 360° comprehensive protection, a number of protection functions, including short circuit protection, over voltage, under voltage protection, overload protection, reverse connection protection, etc
11. Lithium iron phosphate battery, high energy density and power density, good safety performance.
3. Product features
3.1. Appearance Dimension Drawing (670 * 620 * 260mm)
3.2. Interface Description4. Electrical performance and parameters| Electrical parameters | ||
| Rated Capacity | 2880Wh | |
| Model | AHS-3000 | |
| AC import | Municipal electricity input system | L+N+PE |
| Rated input voltage | 208/220/230/240VAC | |
| AC output | Output system | L+N+PE |
| Output voltage | 208/220/230/240VAC±5% | |
| Output frequency | 50/60Hz±0.1% | |
| Wave form | pure sine wave | |
| Switching period | 10ms | |
| Transfer efficiency | ≥95% | |
| Power rating | 3000VA | |
| Peak power | 5000VA | |
| Battery | Battery pack specifications | 48V60Ah |
| Rated operational voltage | 48VDC | |
| Charging cut-off voltage | 54.8VDC | |
| Discharge cut-off voltage | 41.2VDC | |
| Rated operational current | 60A | |
| Peak discharge current | 120A | |
| Charge | PV charging method | MPPT |
| PV maximum input power | 3000W | |
| MPPT tracking range | 65~150VDC | |
| Maximum PV input voltage | 150VDC | |
| Maximum PV charging current | 60A | |
| Maximum municipal current charge current | 16A | |
| Display | LCD joggle | 4.0-inch LCD / 4 button |
| Joggle | Communicating protocol | / |
| DC output | DC12V*1PCS/USB5V*2PCS | |
| AC import | AC230V16A | |
| AC output | AC230V16A | |
| Environmental parameter | Operating ambient temperature | 0~40ºC |
| Operating environment humidity | 20%~95% (no condensation) | |
| Storage temperature | -15~60ºC | |
| Above sea level | The altitude shall not exceed 1000m, over 1000m, the maximum 4000m, | |
| Noise | ≤50db | |
| Physical parameters | Length*Width*Height (mm) | 620×260×670 |
| Weight (for the reference) | 45kg | |
