Audited Supplier
P2H/P3H
P2H and P3H series axial fans are available in variety of applications including :HVAC, compresssors and engine-driven equipment. The blade size is designed to ensure that when the air flows through the blade surface. The surface of the blade is evenly distributed to achieve the best performance of the impeller. This series of fans has the following advantages over the fan ratio of one injection molding or stamping process:
Advantage:
1.More efficient
2.Less absorbed power
3.Low noise
4Light weight High strength
5.Corrosion resistance
6.Customization
FAQ:
Q: Are almost all fans replaceable?
A: Yes
Q: Can they be fitted?
A: We can machine the connection holes and bushings, so they can definitely be fitted.
Q: Is it safe to use?
A: We will balance and match the angle to the power speed.
Q: Is it possible to replace only the blades?
A: No problem, the design is exactly the same
Blade material
| Symbol | Material | Temperature range | Characteristic | Application |
| PA | Nylon6,Black | -40ºC-110ºC | Anti-aging | Standard load |
| PAG | Nylon6,Black and white | -40ºC-110ºC | Anti-aging | Heavy load |
| PAGST | Nylon6,Black | -40ºC-110ºC | Shock and impact | Strong vilbration occasion |
| PACAS | Nylon6,Blue-gray | -30ºC-100ºC | Conductivity Fire resistance | Explosive danger |
| ALU | Die-cast aluminum alloy | -40ºC-150ºC | Large temperature range | High temperature |
| Blade number | Fan diameter mm (Minimum-Maximum) | Fan Hub | ||||
| P2H | P3H | D6 | D5 | s | ||
| 6 | 141-400 | 173-600 | 9 | 30 | 53 | 3 |
| 8 | 178-437 | 210-637 | 15 | 42 | 68 | 3 |
| 10 | 216-475 | 248-675 | 25 | 76 | 107 | 3 |
| 12 | 250-509 | 282-709 | 25 | 125 | 148 | 3 |
| 14 | 286-545 | 318-745 | 25 | 142 | 170 | 3 |
UTEK-DELE ADVANTAGE
1.Same quality as wingfan and multiwing
2.Software to design the model
3.Full sets of blade and hub
4.Fast delivery
