Model NO.:

HL-BI30P24G-8-SO

After-sales Service:

Lifetime Service

Warranty:

Lifetime Service

Light Source:

LED Lamp

Lamp Body Material:

Aluminum Alloy

Light Type:

Solar

Color Temperature:

6000K/4000K/3000K (Option)

Power:

≥30W

Technics:

Painted Matte

Illumination Time:

Cell Type:

Lithium Battery

Charging Time (H):

Usage:

Garden, Street

IP Rating:

IP65

Certification:

CE, RoHS

Voltage:

12/24V

With Light Source:

With Light Source

Solar Panel Power:

18V30W

Solar Panel Size:

450X345X25mm

Solar Panel Efficiency:

22%

LED Light Power:

30W

LED Chips:

45PCS 3030SMD

Light Luminous Efficiency:

175lm/W

Luminous Flux:

3785lm

Work Mode:

PIR Sensor

Li-ion Battery:

12.6V11ah

Battery Power:

138.6wh

Beam Angle:

120X140 Degree

Running Time:

>5 Hours

Rendering Index:

>75

Trademark:

Goginsor or OEM

Transport Package:

Cartons and Pearl Cotton or Pallet

Specification:

Light Size 282x204x52 mm

Origin:

China

HS Code:

9405410000

Product Description

Charging Indicator Light

LED Indicator to show current battery level and charging status.

Green LED - 70% - 100% Charged
Yellow LED - 30% - 70% Charged

Red LED - 30% Charge or Less

Flashing LED of any color - Battery Charging

Please Note:
The indicator will flash when charging, and when fully charged, it will display green.
On/Off Switch - Will turn the Batten Light On and Off Manually. When using the remote control and the PIR Module, it must always be on.

Remote control instructions:

Syncing the Remote Control to the Solar Light

8 Modes Radar Sensor Solar Battern Light LED Tube Lamp

Syncing the Remote Control to the Solar Light

Find bottom of the light, which is a control panel with a switch, and the indicator light should not be visible.
Keep holding the MASTER ON button ("I" is ON "O" is OFF),and push the power button on the light head, continue to hold the MASTER ON button.
The solar light head will light and flash gently three times indicating the program has been accepted
Release the MASTER ON button.
The light is now is standard mode and can now be turned ON/OFF with the MASTER "I" and "O" at the top of the remote and dimmed using the dimmer buttons.
Now select a work mode from the below

Work Modes
The Solar Light has 8 pre-programed work modes.

Mode Key	Mode Name	Running Mode
1 I	Mode 1	Light on 30% from dark to dawn.
2 I	Mode 2	Light on 50% for 8hrs, and then Light off.
3 I	Mode 3	Light on 80% for 4hrs, and then Light off.
4 I	Mode 4	Light on 100% for 2hrs, and then Light off.
1O	PISensor Mode1	Light on 100% for 3hrs, then to 0% until motion is detected, where the light will operate at 50%.
2O	PIR Sensor Mode 2	Light on 100% for 3hrs, then to 5%, until motion is detected, where the light will operate at 50%.
3O	PIR Sensor Mode 3	Light will not turn on unless motion is detected, where the light will operate at 100%.
4O	Mode RF	returns remote to normal mode (as per left image)

Note:

2. In this version, the remote control cannot control groups separately, and even if the remote control mode (4O)is selected, it can only control all lights together.

2.4GHz self-organizing network instructions

When these lights are installed one after another, spaced about 50 meters apart, and they are synchronized with the same remote control, they will automatically network and form a local area network. In the network, each lamp is equivalent to a signal relay, so it can propagate signal forward one after another, which is suitable for controlling multiple lamps.

Programme Clear
If you want to clear the programming of the remote control and lights to restore the factory settings. Please do the following.
1. Turn on the light.
2. Quickly press Master " I " key 5 times.
3. LED lights will blink 5 times which means that the Programme is cleared successfully.

Adjust the PIR Sensor

LUX Dial: Adjusts the level of darkness at Dusk that must be reached before the light turns on.
TIME Dial: Adjust delay time from 5 seconds to 5 minutes.
SENS Dial: Adjust the sensitivity from min. to max. (about 0-12 meters).

The Remote Control

1. Are you a factory or a trading company?

A: We are a manufacturer. Welcome OEM and ODM for you.

2. Can we have a sample order?

A: Of course! Any sample order is welcome for testing and checking.

3.What is the warranty for the products?

A: Battery:3 years. Controller/LED:5 years. solar panels:15-20 years

4. What about the lead time?

A:Sample needs 3-5 days, mass production time needs 2-3weeks.

5.How to ship the goods?

A: By sea usually. If urgent requirement, air-shipping is available(except:Batteries)

6.How to deal with the faulty?

A: Firstly,Our products are produced in strict quality control system and the defective rate will be less than 0.2%.Secondly,
during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will
repair them and resend them to you or we can discuss the solution including re-call according to real situation.

Message Type
* Message Content
* Name
* Phone
* Email
* CAPTCHA

30W Motion Sensor and 2.4 GHz 8 Lighting Modes Self-Organizing Network Solar Flood Light

Shen Zhen Goginsor Lighting Co. Ltd

Please Note:
The indicator will flash when charging, and when fully charged, it will display green.
On/Off Switch - Will turn the Batten Light On and Off Manually. When using the remote control and the PIR Module, it must always be on.

Remote control instructions:

Syncing the Remote Control to the Solar Light

2.4GHz self-organizing network instructions

30W Motion Sensor and 2.4 GHz 8 Lighting Modes Self-Organizing Network Solar Flood Light

Shen Zhen Goginsor Lighting Co. Ltd

Please Note: The indicator will flash when charging, and when fully charged, it will display green. On/Off Switch - Will turn the Batten Light On and Off Manually. When using the remote control and the PIR Module, it must always be on.

Remote control instructions:Syncing the Remote Control to the Solar Light

2.4GHz self-organizing network instructions

Please Note:
The indicator will flash when charging, and when fully charged, it will display green.
On/Off Switch - Will turn the Batten Light On and Off Manually. When using the remote control and the PIR Module, it must always be on.

Remote control instructions:

Syncing the Remote Control to the Solar Light