30W Solar Batten Light with 2.4G Remote Control

1. Solar Batten (Tri-Proof) Light 30W Tube with 2.4G Remote Control is an advanced commercial-grade energy-efficient lighting system powered by
    Solar Energy and battery.
2. The range between the light and Remote control can be up to 100m.
3. One Remote Control can be linked to up to Four Groups Batten Lights, Each Group can up to 256 Lights.
4. Batten Lights can be combined into a lighting system with up to FOUR Groups connected to one Remote Control and operated via a single Remote
    Control Pad.
5. Bright Powerful 30W lighting supplied by 120 LED SMT2835 with adjustable brightness 8% to 100% via the Remote Controller.It can last for 50 hours
  at 8% brightness
6. Extended and Improved 18V 30W Solar Panel with High Energy Conversion rate to charge full the battery in 5-6h in sunny weather conditions. 
7. Detached Solar Panel design with 3m extension cord allows keeping the panel outdoor at the direct sunlight while the light can be used at shaded
  locations or indoor.
8. The light can be operated with Remote pad or manually switch. 
9. Suitable for outdoor and indoor use including daytime operation.
10.Durable Body made of Aluminium combined with industrial-grade pc. enhanced heatproof and weather resistance.
11.Easy to install, setup and operate. Completely safe. Charging protection and discharging protection.
12. No maintenance cost. User-friendly design, no wiring or any professional installation needed.

 

    Charging Indicator Light
     1. Solid Green LED = Battery full Charged
     2. Flashing Green or Yellow or Red = Battery charging
     3. Battery Level Display:
            Green LED = High Volt ( >11.5V ),
            Yellow LED = Medium Volt (11.5-10.5V),
            Red    LED  = Low Volt  (<10.5V).
Please Note:The indicator will flash when charging, and when fully charged, it will display green.
·On/Off Switch - Will turn the Batten Light On and Off Manually. When using the remote control, it must always be on.

Easy to Use
  Syncing the Remote Control to the Solar Light 
  Before using the remote control for the first time, you will need to connect the light to the remote control.
 

1.How to Program a new remote Control:
 

    Press and Hold the Group ON "I" Button of the remote

    control, then turn on the switch of the light.When the
 

      Light flashes 3 times, code matching is successful.
 

2.HoW to Remove all programming of remote control:
 

    Press and Hold the Master On "I" Button, then turn on the

     light switch. When the Light will flash five times to indicate
 

     the code has been cleared.

Remote Control Usage

1. Are you a factory or a trading company?

 A: We are a manufacturer. Welcome OEM and ODM for you.

2. Can we have a sample order?

A: Of course! Any sample order is welcome for testing and checking.

3.What is the warranty for the products?

A: Battery:3 years. Controller/LED:5 years. solar panels:15-20 years

4. What about the lead time?

 A:Sample needs 3-5 days, mass production time needs 2-3weeks.

5.How to ship the goods?

A: By sea usually. If urgent requirement, air-shipping is available(except:Batteries)

6.How to deal with the faulty? 

A: Firstly,Our products are produced in strict quality control system and the defective rate will be less than 0.2%.Secondly,
during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will
repair them and resend them to you or we can discuss the solution including re-call according to real situation.