Audited Supplier
30MM Width High Watt Crankcase Heater for Commercial Air Conditioner Compressor
Crankcase Heater is using SIlicon Rubber as insulation material,Nickel chromium wire as heating material, The heating width is 14mm,20mm,25mm and 30mm,the heating length is from 200mm to 10000mm even longer.The voltage is according to different country like 110V-480V, And watt is accoding to heating width,14mm for 50W/M,20-30MM for 100W/M. The warranty is about 2 yeares.
| ITEM | 30MM Width High Watt Crankcase Heater for Commercial Air Conditioner Compressor | Insulation Material | Silicon Rubber |
| Heating Material | Nickel chromium wire/ Iron chromium wire | Heating Width | 30MM |
| Heating Length | 300MM-30000MM | Voltage | 230V |
| Leads | Silicon rubber material 1000MM length | Working Tem | -60C-200C |
| Warranty | 2 YEARS | MOQ | 200PCS |
Applied insertion to rated voltage below 450V,50-60HZ,related humidity<90%,diffuse heat after conducting at electricity in an environment temperature of -30-50C.It is generraly used in central air conditioner compressor.It is also applied in cold area,and oil tube
The main function of the heating belt at the bottom of the compressor is to prevent liquid compression during start-up and operation of the compressor
Therefore, before starting up (or debugging) the unit for the first time after the air conditioning unit changes seasons or just after the installation of the central air conditioning, it is necessary to preheat the unit in advance (usually more than 6 hours).
After advanced power transmission, the compressor heating belt can deliver power, which can evaporate the liquid refrigerant present in the compressor in advance, ensuring the service life of the compressor. (Tip: When the air conditioner is not used for a long time, it is necessary to cut off the power to the internal and external units, as the electric heating belt will cause a certain amount of power loss.).
There are 4 types width cranckase heater, they are 14mm,20mm,25mm,30mm
ROHS AND CE CERTIFICATED
CRANKCASE HEATER IS PACAKGE BY POLY BAG+CARTON,then Pallet or Wooden Case
2-10-20 cartons per pallet
3-Wooden case according to requirement
Shipment is according to customer requirements and products quantity
B-For large quantity,shipment via air from Shanghai Airport or Beijing Airport
C-For large quantity,shipment via sea from Ningbo port or Shanghai port
SHENGZHOU JINGWEI ELECTRIC HEATING APPLIANCE CO LTD IS ESTABLISHED IN 2020, THERE ARE MORE THAN 3000M3 MANUFACTURING ZONE,THERE ARE MORE THAN 100 STAFFS, AND IT IS NEAR NINGBO PORT AND SHANGHAI PORT. THERE ARE FAMOUS CUSTOMER LIME MIT,SKYWORTH ETC
Q:WHAT IS THE MATERIAL OF HEATER?
A:THERE IS SILICON RUBBER
Q:HOW WE CHOOSE THE BELT HEATER WIDTH?
A:THE WIDTH IS 14MM,20MM,25MM,30MM
Q:SHALL WE DESIGN THE PRODUCT?
A:YES,YOU JUST SEND ME WIDTH,LENGTH,VOLTAGE,WATT
Q:WHAT IS THE WARRANTY?
A:2 YEARS FROM LEAVING FACTORY
Q:HOW TO ORDER?
A:PLEASE SEND ME INQUIRY VIA NETPAGE OR CALL ME l
Q:HOW MANY WORKERS IN FACTORY?
A:THERE ARE MORE THAN 100 WORKERS IN FACTORY, AND MORE THAN 15 WORKERS IN OFFICE
