Audited Supplier
ISO
Steel Structure Walkway, Foot Pedal, Drain Cover
Machine Welding
Carbon Steel
Stainless Steel
Hot/Cold - DIP
Product Attribute
Silver/Black
TT
Buning
G235 30/100
China
7308900000
Product Description
introduction to products:
Steel grid surface treatment:
Hot dip galvanized, cold galvanized, paint, dip anti-rust oil, do not deal with (general stainless steel do not deal with).
Method of making steel lattice plate:
Pressed-welded steel grid is made up of load flat steel and horizontal bar arranged in warp and weft at a certain distance. It is
welded into the original plate by hydraulic resistance welding automation equipment of 200 tons, and processed into the product
required by customers through cutting, opening, edge packing and other procedures.
Load flat steel spacing:
The center distance between two adjacent flat steel receiving loads is usually 30MM and 40MM.
Cross bar spacing:
The center spacing of two adjacent cross bars is usually 50MM, 100, two kinds, can be produced according to customer requirements.
Superiority:
Material saving:
The most economical way of material under the same load condition, correspondingly, can reduce the material of supporting
structure.
Reduce investment:
Save material, save labor, save time limit, avoid cleaning and maintenance.
Construction is simple:
In the pre-installed support with bolts clamped or welded fixed, one person can complete.
Material specifications:
stainless steel texture/Aluminum/
Hot dip galvanized, cold galvanized, paint, dip anti-rust oil, do not deal with (general stainless steel do not deal with).
Method of making steel lattice plate:
Pressed-welded steel grid is made up of load flat steel and horizontal bar arranged in warp and weft at a certain distance. It is
welded into the original plate by hydraulic resistance welding automation equipment of 200 tons, and processed into the product
required by customers through cutting, opening, edge packing and other procedures.
Load flat steel spacing:
The center distance between two adjacent flat steel receiving loads is usually 30MM and 40MM.
Cross bar spacing:
The center spacing of two adjacent cross bars is usually 50MM, 100, two kinds, can be produced according to customer requirements.
Superiority:
Material saving:
The most economical way of material under the same load condition, correspondingly, can reduce the material of supporting
structure.
Reduce investment:
Save material, save labor, save time limit, avoid cleaning and maintenance.
Construction is simple:
In the pre-installed support with bolts clamped or welded fixed, one person can complete.
Material specifications:
stainless steel texture/Aluminum/
Technical Data Table
Material | Low carbon steel, stainless steel or following customer requirements | |||
Bearing bar specifications (mm) | 20 X 3 to 100 X 10; 25 X 5 X 3, 32 X 5 X 3, 38 X 5 X 3, 40 X 5 X 3, 50 X 5 X 3, 50 X 7 X 4, 55 X 7 X 4, 60 X 7 X 4, 65 X 7 X 4, 70 X 7 X 4, 75 X 7 X4mm, or customized | |||
Bearing bar pitch (center to center) | 12.5, 15, 25, 30, 30.16, 32.5, 34, 40, 41.25, 45, 50, 60, 60.32, 80, 100 mm etc, or customized | |||
Cross bar pitch (center to center) | 38, 50, 76, 100, 101.6mm etc, or customized | |||
Surface Treatment | Nature, hot DIP galvanizing, paint spraying or following customer requirements | |||
Features | Anti-rust, durable, strong, safe, easy installation | |||
Packing | Wrapped with film and straps, wooden pallet packing | |||
Meeting steel grating standards | A) China: YB/T4001.1-2007 B) USA: ANSI/NAAMM(MBG531-88) C) UK: BS4592-1987 D) Australia: AS1657-1985 | |||
company introduction:
HEIBEI ZHUOTE METAL WIRE MESH PRODUCTS CO., LTD. is located in the famous "screen of the township" Anping County, my company is a
professional engaged in steel grid plate, grille plate, step plate, groove cover plate production and sales of large enterprises.
professional engaged in steel grid plate, grille plate, step plate, groove cover plate production and sales of large enterprises.
FAQ:
Q: Are you a manufacturer?A: Yes,we have specialized in this field for about 10 years experience.
Q: Could you provide sample ?
A: Yes,we can provide sample in half A4 size together with our catalogue.
But the courier charge will on your side.
We'll send back the courier charge if you make an order.
Q: What information should I provide,if I want a lowest quotation?
A: The specification of wire mesh.such as material,mesh number, wire diameter,hole size,width,quantity,finishing.
Q: How is your delivery time?
A: We always prepae enough stock material for your urgent requirement. the delivery time is 7days for all the stock material.
We'll check with our production department for the non-stock items to offer you the exact delivery time and producing schedule.
Q: How do you ship the finished wire mesh?
Usually by sea.
Q: What is the payment?
We usually use the T/T,L/C,D/P,Western Union.
