Audited Supplier
GHP32
Motor, Electric Cars, Machinery, Marine, Agricultural Machinery, Car
Hardened Tooth Surface
Horizontal Type
Coaxial
Cylindrical Gear
1~4
Planetary Gear Reducer
Shan high
Cheng Du
Product Description
1.Ratio
| Stage 1 | Ratio: | 4.4:1 | 5.25:1 | 8.3 | ||||||
| Max. continuous torque | 2.34 N.m | |||||||||
| Max. intermittent torque at gear output | 7.29 N.m | |||||||||
| precision options | Routine Precision | ≤1.5°~2 °(Default Value) | ||||||||
| high precision | ≤5arcmin (Customizable) | |||||||||
| Stage 2 | Ratio: | 15:1 | 17:1 | 18:1 | 19:1 | 20:1 | 23:1 | |||
| Max. continuous torque | 3.1 N.m | |||||||||
| Max. intermittent torque at gear output | 9.3 N.m | |||||||||
| precision options | Routine Precision | ≤1.5°~2 °(Default Value) | ||||||||
| high precision | ≤10arcmin (Customizable) | |||||||||
| Stage 3 | Ratio: | 65.5:1 | 75:1 | 98:1 | 125:1 | 150:1 | 207:1 | 250:1 | ||
| Max. continuous torque | 3.88 N.m | |||||||||
| Max. intermittent torque at gear output | 11.64 N.m | |||||||||
| precision options | Routine Precision | ≤1.5°~2 °(Default Value) | ||||||||
| high precision | ≤15arcmin (Customizable) | |||||||||
| Stage 4 | Ratio: | 277:1 | 302:1 | 400:1 | 706:1 | 950:1 | 1500:1 | 1860:1 | 3380:1 | |
| Max. continuous torque | 4.65 N.m | |||||||||
| Max. intermittent torque at gear output | 13.9 N.m | |||||||||
| precision options | Routine Precision | ≤1.5°~2 °(Default Value) | ||||||||
| high precision | ≤20arcmin (Customizable) | |||||||||
| Gear wheel material: | Metal | Lubricating: | grease | |
| Noise: | ≤50 db | Max. Input speed (r/min): | ≤30000 rpm | |
| It can be customed whe the input sped is over 40000 rpm | ||||
| Max. axial load: | ≤12Kgf | Max. radial load (10mm from flange): | ≤20Kgf | |
| Radial play of shaft: | ≤0.04mm | (optional) Back lash for one stage: | ≤1.5°~2° | |
| ≤5~10arcmin | ||||
| Axial play of shaft: | ≤0.4mm | Opertating temperature range: | (-30~+100)ºC |
- The dimensions of the output and the input shaft can be customizable, and there will be a keyway on 4*4 in the standard output shaft
GHP32
- Gearbox Length is nonstandard at high speed
- Stage 4 "L"=53.7
- Stage 3 "L"=46.2
- Stage 2 "L"=38.7
- Stage 1 "L"=31.2
