Audited Supplier
ATARI LYNX1 LCD
No
No
LCD:Display
by Long Press'select+L+R Console
Yes
Chongqing, China
32pin.40pin Oriainal Console and V2 IPS Gba Mod
Turns Gba Into Agba Switch
for Gba
OEM
HDMI, 'power Supply'and'controller Signal
No
Yes
USB-C Host Charger and Ordinary USB Charger
720480
Letter
China
Product Description
32Pin/40Pin 720P HDMI GBA Bluetooth Dock Kit V2 For Game Boy Advance Console GBA Bluetooth HDMI Dock For Gameboy Advance
Turn GBA Into a GBA Switch.
This kit allows the Game Boy Advance to be played by an external controller via a USB-C HDMI docking station. This kit slso allows you to play games on television. Once this mod is installed in the GBA, this essentially turns the GBA into a Switch like console. Note: This advertising doesn't include GBA console, the controller, and the LCD kit.
Product Description:
1. HDMI, 'power supply' and 'controller signal' all transmitted via USB-C (Type-c).
2. Turns GBA into A 'GBA SWITCH'
3. 720P HDMI image.
4. The battery protection circuit has been embedded on the PCB board. No need to remove the batteries when plug the GBA in the Station Dock.
5. Support SNES controller, NES Mini controller.
6. Support Bluetooth contoller. Support PS3 / PS4 / PS5 / Xbox One S / Xbox Series X|S / Wii / Wii U Pro / Switch Pro/ Switch Joycon Wireless Controllers, etc.
7. Compatible USB-C host charger and ordinary USB charger.
8. ON/OFF the LCD display of game console by long press 'Select+L+R'.
9. Adjust the HDMI image ratio by long press 'Select+A+B'.
Compatible: 32 pin original LCD GBA console, 40 pin original LCD GBA console, V2 IPS GBA Mod console.
The Bluetooth Button Usage:
1.Holding for 0-3 seconds will disconnect all connected Bluetooth controllers and enable pairing mode. In this state all four front port LEDs will be slowly blinking. 2.Holding for 3 seconds or more will factory reset to the original firmware and remove any custom configs. In this state all four front port LEDs will be blinking rapidly.
Specifications: Material: ABS
Compatible: 32 pin original LCD GBA console, 40 pin original LCD GBA console, V2 IPS GBA Mod console.
The Bluetooth Button Usage:
1.Holding for 0-3 seconds will disconnect all connected Bluetooth controllers and enable pairing mode. In this state all four front port LEDs will be slowly blinking. 2.Holding for 3 seconds or more will factory reset to the original firmware and remove any custom configs. In this state all four front port LEDs will be blinking rapidly.
Specifications: Material: ABS
Interface: USB-C female, USB-C male, Micro HDMI female, SNES controller socket, NES Mini controller socket.
Note: This advertising doesn't include GBA console,doesn't include the controller, doesn't include the LCD kit.
Packing including:
1x GBA Bluetooth HDMI Dock 1x 720p HDMI PCB board 3x ribbon cables 3x wires 2x screwdrivers. 1x HDMI adapter cable
Note: This advertising doesn't include GBA console,doesn't include the controller, doesn't include the LCD kit.
Packing including:
1x GBA Bluetooth HDMI Dock 1x 720p HDMI PCB board 3x ribbon cables 3x wires 2x screwdrivers. 1x HDMI adapter cable
