Applications
Consist of a rod of reinforcing the splice, hot fusion tubing and cross-linked polyolefin. To rebuild the coating of fiber to provide mechanical strength at the fusion joint area and keep optical transmission properties.
Operating temperature range
Operating temperature: -45ºC~100ºC / -45ºC~135ºC
Minimum shrink temperature :80ºC
Minimum fully recovery temperature:120ºC
Characteristics
Moisture resistant for environmental protection
Clear sleeve make it easy to detect splice before shrinkage
Easily use and avoid any damages to the optical fiber during installation
Color optical fiber splice protector is very convenience for installation
Technical indicators
| Performance | Test Method | Typical data |
| Tensile strength | ASTM D 2671 | 18MPa |
| Elongation at break | ASTM D 2671 | 700% |
| Density | ISOR 1183D | 0.94g/cm3 |
| Dielectric strength | IEC243 | 25KV/mm |
| Volume resistance | IEC243 | 1015Ω.cm |
| Length changes | ASTM D 2671 | ±5% |
Product Dimensions
| Part NO. | OD after Recovery (mm) | Length (mm) | Fusion tube (D) | Steel rod(d) | Package(pcs/bag) | ||
| ID(mm) | Length (mm) | OD(mm) | Length (mm) | ||||
| DFSP-60 | 3.0±0.1 | 60 | 1.5 | 60 | 1.5 | 55 | 100 |
| DFSP-60 | 2.8±0.1 | 60 | 1.3 | 60 | 1.5 | 55 | 100 |
| DFSP-45 | 3.0±0.1 | 45 | 1.5 | 45 | 1.5 | 40 | 100 |
| DFSP-40 | 3.0±0.1 | 40 | 1.5 | 40 | 1.5 | 35 | 100 |
| DFSP-23 | 3.0±0.1 | 23 | 1.5 | 23 | 1.5 | 18 | 100 |
| DFSP-60 | 2.6±0.1 | 60 | 1.3 | 60 | 1.2 | 55 | 100 |
| DFSP-45 | 2.6±0.1 | 45 | 1.3 | 45 | 1.2 | 40 | 100 |
| DFSP-40 | 2.6±0.1 | 40 | 1.3 | 40 | 1.2 | 35 | 100 |
| DFSP-30 | 2.6±0.1 | 30 | 1.3 | 30 | 1.2 | 25 | 100 |
| DFSP-25 | 2.6±0.1 | 25 | 1.3 | 23 | 1.2 | 20 | 100 |
Color :red , blue , yellow , clear , green , purple(With MOQ:100,000 pcs)













Audited Supplier










