Audited Supplier
S1-35
Insulators, Switchgear Cabinet Bare Bus Bar
Red
Rubber
2.5:1
-40~105°c
Sumitomo Irrax Sbi350
36 Kv
Insulation Sleeve & Tube
Organic Insulation
ISO9001
Upm Heat Shrink
UPM
Neutral Packaging
Dalian China
39173200
Product Description
S1-35 Flame Retardant Bus Bar Insulation Heat Shrink Tube
| Features | ||||
| Heavy wall cross-linked polyolefin | Operating temperature: -40~105 ºC | |||
| Flame retardant | Shrink temperature: 125 ºC | |||
| Bus bar insulation and protection | Shrink ratio: 2.5:1 | |||
| Reduces bus bar clearance requirement | Voltage class: 36KV | |||
| RoHS compliant | ||||
| Protects against short circuit and electrical leakage caused by small animals | ||||
| Technical Data | ||||
| Property | Test method | Values | ||
| Physical | Tensile strength | ASTM D2671 | ≥11 MPa | |
| Breakdown elongation | ASTM D2671 | ≥400% | ||
| Aging (136ºC/168hrs) | Tensile strength | ASTM D2671 | ≥10 MPa | |
| Breakdown elongation | ASTM D2671 | ≥300% | ||
| Long term aging | ||||
| (120ºC/3000hrs) Breakdown elongation | IEC 60684-2 | ≥175% | ||
| Resistance to selected fluids Tensile strength | IEC 60684-2 | ≥8MPa | ||
| (23ºC/168hrs) Breakdown elongation | IEC 60684-2 | ≥250% | ||
| Density | ASTM D2671 | 1.15~1.25 | ||
| Thermal endurance | IEC 216 | 105 ºC | ||
| Water absorption ((23ºC/336hrs)) | ASTM D570 | ≤0.5% | ||
| Low temperature flexibility(-40ºC/4hrs) | ASTM D2671 | No cracking | ||
| Heat shock (200ºC/4hrs) | ASTM D2671 | No drop, No flow, No cracking | ||
| Electrical | Volume resistivity | ASTM D2671 | ≥1012 Ω.cm | |
| Dielectric strength(in insulation oil) | ASTM D2671 | ≥16 KV/mm | ||
| Chemical | Color fastness to light | IEC 60684-3 | Compare between exposed and unexposed parts the color does not change | |
| Flammability | ASTM D2863 | OI≥27 | ||
| Copper corrosion(158ºC/168hrs) | IEC 60684-3 | Pass | ||
| Dimensions | ||||
| Reference | As supplied(mm) | After recovered(mm) | Standard length | |
| UPM S1-35 | ID min. | ID max. | WT nom. | m/spool |
| 25/10 | 25 | 10 | 3.5 | 15 |
| 30/12 | 30 | 12 | 3.6 | 15 |
| 40/16 | 40 | 16 | 3.6 | 15 |
| 50/20 | 50 | 20 | 3.6 | 15 |
| 65/25 | 65 | 25 | 3.6 | 15 |
| 75/30 | 75 | 30 | 3.7 | 15 |
| 85/35 | 85 | 35 | 3.7 | 15 |
| 100/40 | 100 | 40 | 3.7 | 15 |
| 120/50 | 120 | 50 | 3.8 | 15 |
| 150/60 | 150 | 60 | 3.8 | 15 |
| 175/75 | 175 | 75 | 3.8 | 15 |
| Product selection | ||||
| Bus bar size (mm) | Single layer bus bar | Two layers bus bar | ||
| 20×3,25×3 | Φ25/10 | Φ30/12 | ||
| 30×3,30×4 | Φ30/12 | Φ40/16 | ||
| 30×10,40×4 | Φ40/16 | Φ50/20 | ||
| 40×10,50×5,50×6 | Φ50/20 | Φ65/25 (Φ75/30) | ||
| 50×8,50×10,60×6,60×8 | Φ65/25 (Φ75/30) | Φ75/30(Φ85/35) | ||
| 60×10,80×6,80×8,80×10 | Φ75/30(Φ85/35) | Φ100/40(Φ120/50) | ||
| 100×8,100×10,100×12 | Φ100/40(Φ120/50) | Φ120/50 | ||
| 100×15,120×10,120×12,120×15 | Φ120/50 | Φ150/60 | ||
| 150×12,150×15 | Φ150/60 | Φ175/75 | ||
| ID=Internal Diameter | WT=wall thickness | |||
| Typical application | ||||
| Suitable for insulation and protection of bus bar against accidental flashover up to 36 KV | ||||
| Ideal for using in switchgears cabinets or distribution board where space is limited and air | ||||
| spacing between bus bars need to be kept at minimal | ||||
| Ordering | ||||
| Standard color : Red | ||||
| Standard packaging on spools. | ||||
| Please specify specification,quantity when ordering | ||||
| Cross reference | ||||
| Sumitomo: IRRAX sleeve SBI 350 | ||||
