Audited Supplier
High Power version with 5A stall current:5A
With 64CPR encoder or not 64CPR ;
With back shaft or not.
With metal brush or carbon brush.
This 37mm diameter gearbox motor, the first stage by the spur tooth, helical pinion options, if there is a gear operation requires a small clearance, generally choose helical gear.
At present, there are two kinds of voltage, 12V and 24V, and the parameters of the motor are the same.
We have a variety of gearbox ratios, from 10:1 to 810:1.
The same gearbox can also be matched with different motors such as 3530,540,545,555, etc., to form a wide range of output speeds and torques.
This motor can be equipped with a 16PPR (64CPR) magnetic encoder, so that it has the same function as a servo motor, cost-effective is very high, used in a variety of intelligent control products, such as robots, 3D printers and so on.
| Model | Voltage Unit: VDC | No load speed Unit: rpm | Noload current Unit: mA | Stall torque Unit: kg.cm | Gear ratio |
| 37D306-EN | 12V | 1760 rpm | 250mA | 3.9 kg.cm | 6.25:1 |
| 37D3010-EN | 12V | 1100 rpm | 250mA | 5.5 kg.cm | 10:1 |
| 37D3019-EN | 12V | 585 rpm | 250mA | 9 kg.cm | 18.75:1 |
| 37D3030-EN | 12V | 365 rpm | 250mA | 15 kg.cm | 30:1 |
| 37D3050-EN | 12V | 220 rpm | 250mA | 21 kg.cm | 50:1 |
| 37D3070-EN | 12V | 157 rpm | 250mA | 31 kg.cm | 70:1 |
| 37D30100-EN | 12V | 107 rpm | 250mA | 45 kg.cm | 102:1 |
| 37D30131-EN | 12V | 83 rpm | 250mA | 55 kg.cm | 131.25:1 |
| 37D30168-EN | 12V | 65 rpm | 250mA | 70 kg.cm | 168.75:1 |
| 37D30270-EN | 12V | 40 rpm | 250mA | 70 kg.cm | 270:1 |
| 37D30506-EN | 12V | 21 rpm | 250mA | 70 kg.cm | 506.25:1 |
| 37D30810-EN | 12V | 13 rpm | 250mA | 70 kg.cm | 810:1 |
