Audited Supplier
Welcome to visit our showroom! It's my honor to introduce you our product.
This CUT100 welding machine is standards Riland type machine. Riland company invented this Mosfet Technology inverter welding machine at the year of 1987. After continuously updating, the Mosfet inverter welding machine become very mature and very stable. We sincerely obey Riland original design because our experienced engineer, more than 15 years in this area, think that Riland design is very mature, and any change of the design may caused machine problem. A lot of other factory tried. we saw many examples.
CUT SERIES INDUSTRY GRADE IGBT INVERTER PLASMA CUTTING POWER RESOURCE
CUT-100
Max cutting thickness 50 mm
Suitable for CNC cutting
Features:
*With digital control port, can provide special signal for CNC such as 1:1 arc voltage, successful arc strike judgment etc.
* Pioneer of new arc maintenance technology, with high-frequency ignition at millisecond level and very less high-frequency interference.
*Preset current function, can preset accurate cutting current with infinite adjusting way to cut different thickness plate.
*Better external and dynamic characteristic than transformer type cutting machine, with excellent performance like high successful rates of arc striking, good arc stiffness, smooth cut.
*Current rising slowly when arc starting, effectively extend the life of electrode and nozzle.
*Very stable cutting current, it doesn't influence the cutting current when voltage fluctuates within 10%.
*High duty cycle, no stop at max cutting current.
*With non-contact arc striking, excellent instant arc strike function.
*Arc is strong. It can cut the metal which has rust and paint conveniently.
*Less pollution, more economy, effectiveness than flame cutting machine.
*Over-current, over-heat, and overload protection system, make sure the equipment works reliable.
*2T/4T Function, reducing labor intensity.
Specification:
| Type | LGK-100 | |
| control mode | IGBT inverter | |
| Rated input voltage | AC380V | |
| Rated input current(A) | 22 | |
| Rated input capacity(KVA) | 14.5 | |
| Rated output current(A) | 100 | |
| Cable cross-sectional area | mains input(mm2) | 4 |
| power output(mm2) | 16 | |
| ground wire(mm2) | 4 | |
| Rated output voltage(V) | 120 | |
| Duty cycle(%) | 100 | |
| Rated no-load voltage(V) | 285 | |
| Current adjustment range(A) | 30-100 | |
| Quality cutting thickness (carbon steel)(mm) | 1~30 | |
| Maximum cutting thickness (carbon steel)(mm) | 35 | |
| Using plasma gas | Compressed air | |
| Gas pressure range(MPa) | 0.4-0.5 | |
| Applicable air compressor capacity(m3) | ≥0.3 | |
| Arc ignition mode | High pressure non-contact | |
| Enclosure rating | IP21S | |
| Insulation rating | F | |
| Cooling method | Air | |
| Power factor | 0.93 | |
| Dimensions(mm) | 510*265*500 | |
| Host weight(KG) | 40 | |
