Audited Supplier
XGF
Volumetric Filling Machine
Automatic
Liquid
Multi-Head
Multi-Room Feeding
Capacity Cup
Pressure
Pneumatic Lifting
Rotary
Bottle
Wooden Package
Filling Machine
200-3000bph
Washing, Filling, Capping
Pressure Type
Round/Square
3-10L
Plastic/Glass
Stainless Steel 304/316
24 Months
Siemens PLC
Zhangjiagang City, China
Honor Machine
Shipping
10-30m3
China
8422301090
Product Description
3L 5L 7L 10L Big Pet Glass Bottle Automatic Liquid Pure Mineral Soda Sparkling Drinking Water Bottled Production Rinsing Filling Capping 3in1 Bottling Machine
There is linear type and rotarty type,This machine is mainly used for liquid filling and capping,accept 3-10L plastic
or glass bottle. its main features are:
1)bottle red card is the bottleneck parts of method used, rotate 180 degrees, washing efficiency.
2)the use of fixed surface of the filling means filling quality, filling speed quickly.
3)the use of mechanical liquid level automatic control mechanism.
4)filling valve, hydraulic cylinder and other parts of surface are in direct contact with high-quality stainless steel,
corrosion-resistant, easy to clean, in line with industrial hygiene requirements.
5)the use of electromagnetic speed control motor, strong production capacity to achieve any adjustments.
6)compact structure, convenient operation and easy maintenance.
Working principle:
The machine adopts the principle is given liquid filling pressure filling. Main process is: cleaned the bottle into the
bottle trackwheel appropriated by the lift shaft parts, with the dial clockwise, the bottle filling valve from the bottom
up and seal the bottle and realized the bottle sealed contact with the valve open Liquid cylinder of liquid in the
downstream effects of its weight into the bottle, while the air inside the bottle of liquid in the shed, driven out from
the center tube discharge valve, the liquid until the bottle vent pipe flooded the center, the irrigation Installed to stop,
with the bottle down, filling valve closed, filling the bottle by the end of the bottle sealed trackwheel output into the
next process.
Main technical parameters:
Filling capacity: 3L-10L (standard filling volume)
Filling materials: water
Bottle type: PET bottle
Bottle size: bottle diameter ∮ 100-220MM, bottle height 150-350MM (special requirements can be customized)
Filling method: filling pressure
Applicable cap type: standard plastic screw cap
Power: 2.2KW
Voltage: 380V three-phase AC
Rinse water consumption: (sterile water) ≈ 0.5-0.8M3 / H
Pressure: 0.4MPA
Equipment Dimensions: L4500 * W1400 * H2200MM
Equipment weight: 1800KG
Main parts list:
Washing part:
Filling part:
Capping part:
Linear type:
Rotary type:
There is linear type and rotarty type,This machine is mainly used for liquid filling and capping,accept 3-10L plastic
or glass bottle. its main features are:
1)bottle red card is the bottleneck parts of method used, rotate 180 degrees, washing efficiency.
2)the use of fixed surface of the filling means filling quality, filling speed quickly.
3)the use of mechanical liquid level automatic control mechanism.
4)filling valve, hydraulic cylinder and other parts of surface are in direct contact with high-quality stainless steel,
corrosion-resistant, easy to clean, in line with industrial hygiene requirements.
5)the use of electromagnetic speed control motor, strong production capacity to achieve any adjustments.
6)compact structure, convenient operation and easy maintenance.
Working principle:
The machine adopts the principle is given liquid filling pressure filling. Main process is: cleaned the bottle into the
bottle trackwheel appropriated by the lift shaft parts, with the dial clockwise, the bottle filling valve from the bottom
up and seal the bottle and realized the bottle sealed contact with the valve open Liquid cylinder of liquid in the
downstream effects of its weight into the bottle, while the air inside the bottle of liquid in the shed, driven out from
the center tube discharge valve, the liquid until the bottle vent pipe flooded the center, the irrigation Installed to stop,
with the bottle down, filling valve closed, filling the bottle by the end of the bottle sealed trackwheel output into the
next process.
Main technical parameters:
Filling capacity: 3L-10L (standard filling volume)
Filling materials: water
Bottle type: PET bottle
Bottle size: bottle diameter ∮ 100-220MM, bottle height 150-350MM (special requirements can be customized)
Filling method: filling pressure
Applicable cap type: standard plastic screw cap
Power: 2.2KW
Voltage: 380V three-phase AC
Rinse water consumption: (sterile water) ≈ 0.5-0.8M3 / H
Pressure: 0.4MPA
Equipment Dimensions: L4500 * W1400 * H2200MM
Equipment weight: 1800KG
Main parts list:
| Item | Parts Name | Brand | Brand |
| 1 | PLC | SIEMENS | Germany |
| 2 | Inverter | ||
| 3 | Touch Screen | ||
| 4 | Switch | ||
| 5 | Contactor | ||
| 6 | Relayer | ||
| 7 | Solenoid Valve | AIRTAC | Taiwan |
| 8 | Drive motor | FEITUO | Swiss |
| 9 | Reducer | CNP | China |
| 10 | Water Pump | CUSTOMIZED | China |
| 11 | Main Bearing | AUTONICS | Sweden |
| 12 | Sensor | AIRTAC | Korea |
| 13 | Air component | ABB | Taiwan |
Washing part:
Filling part:
Capping part:
Linear type:
| Model | XGF4-4-1 | XGF6-6-1 | XGF9-9-3 |
| Capacity 5L/bottle/h | 200-400 | 400-700 | 700-1000 |
| Washing head | 4 | 6 | 9 |
| Filling head | 4 | 6 | 9 |
| Capping head | 1 | 1 | 3 |
| Power(kw) | 3 | 5 | 7.5 |
| Dimension(mm) | 2650*1100*1750 | 3400*1100*1750 | 4150*1100*1750 |
Rotary type:
| Model | XGF12-12-4 | XGF16-16-5 | XGF24-24-8 |
| Capacity 5L/bottle/h | 1000-1500 | 1500-2500 | 2500-3000 |
| Total power | 2.5 | 3.2 | 4.2 |
